Toroidal Windmill - Customizable System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A beautiful windmill with toroidal propellers. Put 3 you like on the axle. Change direction for cool effects.
- Rating
- 4.925 / 5
- Likes
- 596
- Downloads
- 2,769
- Makes
- 42
- Views
- 10,013
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Toroidal Windmill - Self adjusting turbine
Looks like a spinning flower and no much wind is needed.
Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW going forward. Thank you for your understanding.
Beautiful Windmill with toroidal Propeller Blades
Self adjusting to wind direction through the tail blade
100% printed, no Screws or tools needed
You can add 3 Propellers on one Axle with 2 distances
Full customizable with different propeller sizes and directions (I plan to add more cool propeller types as well)
Rods are stack able to your needed height
Added custom support to the horizontal printing rod
Added some “Slower” Propeller Blades
Printing:
Files has the recommend print orientation.
For Propeller set wall generation to Arachne mode and set walls to 0,7mm
The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.
PETG & PLA tested👍
Assembly:
Info:
The Pitch from the Basic Blades:
Big - Pitch 195mm
Med - Pitch 170mm
Small - Pitch 135mm
Thanks to all followers and don't forget the virtual handshake 👍 ….Happy Printing
You can combine propeller blades with Honeycomb Windmill: https://www.printables.com/model/807216
Checkout this Clamp for Windmill , as well 🧐
Commercial license and more Mods like:
you can get here:
https://www.patreon.com/BamBamDesign/membership