Tissue Box Tissue Retainer "Blow Tie"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Once the tissues in our tissue boxes get to ~50%, they always fall out of reach, this is my solution.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 38
- Makes
- 2
- Views
- 209
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Every tissue box in our house has a thin plastic film that always gets worn down once ~50% of the tissues have been used. Just enough for them to fall down, forcing us to have to dig our hand in after them. This retainer slips between the plastic and the cardboard of the box and holds the tissues in place. It can also slip opposite corners into the plastic film for better retention.
The name “blow tie” was affectionately given since it sort of resembles a bow tie.
Very low filament use design that is printed super quickly if using a 0.28mm or 0.3mm layer height.
I hope you find it as useful as I have!