1 / 2
Reinforced PCI / ISA Slot Bracket for IDE 40pin to SD adapter — image 1
1 / 2

Reinforced PCI / ISA Slot Bracket for IDE 40pin to SD adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed from "PCI / ISA Slot Bracket for IDE 40pin to SD adapter", this adds the following enhancements: Thicker…

Rating
5 / 5
Likes
16
Downloads
412
Makes
3
Views
1,988
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Remixed from "PCI / ISA Slot Bracket for IDE 40pin to SD adapter", this adds the following enhancements:

  • Thicker triangle areas along the bracket so stress from inserting/removing the SD card doesn't flex the bracket as much.
  • Enclosed bracket screw hole, no standalone small tab to break on top.
  • Longer bottom tab, which should completely clear any slot's receiver hole. Printing notes:

  • The triangle shaped brace running the length of the bracket is at a negative angle, but is less than 60 degrees and should not need support.

  • It's possible the bottom tab may be too long in certain conditions. If so, just use tin snips or similar to cut the tab down to size.
  • For mounting the IDE2SD card, I personally enlarge the printed mounting holes using a 7/64" drill bit, and screw them in with standard coarse-thread machine PC screws. It's possible to screw in without pre-drilling, but takes a lot of force.

    How I Designed This

    Tinkercad source

Category: Computer

Tags