1 / 7
LiPo Battery Protective Storage Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a print in place case for a 6s 1050 mAh LiPo battery to protect it during transport, with a locking mechanism.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 31
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
To make this model you simply have to print it, NO additional hardware required. Print settings:
- 0.3 mm first layer height
- 3 perimeters
- No supports are needed
- Make sure to either rotate the print in the slicer or change the top/bottom line direction by 45° so that the first layer layer lines go accross the hinge for maximum strength (see picture below).
