Voron 0.2 Fully Boxed Frame and MGN9C X Carriage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remove the tophat and create a stiffer, fully boxed in frame for the Voron 0.2. Also included my MGN9C X Carriage.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
See it in my Serial Request - https://www.reddit.com/r/voroncorexy/comments/1bbgwc5/v0_custom_serial_request/
Inspired by zruncho3d's BoxZero. His version is great, I used it for a few months, but I wanted to try remixing it myself from the 0.2 parts. - https://github.com/zruncho3d/BoxZero/tree/main
You will need longer vertical extrusions, at least 350mm for the standard 120mm of Z travel. They will also need blind joint holes drilled for the gantry extrusions. I used 400mm MakerBeam XL for the vertical. This allowed me to get an extra 50mm of Z travel by using 250mm extrusions, 200mm rails, and a belted Z, but that's completely optional.
You will also need extra bearings, heatsets, and screws for the A/B drives, and the front idlers will need an M3 nut preloaded into the back channel of the front vertical extrusions.