1 / 2
DJI Mic2 Tripod / Stativ Mount for Arca Swiss and 1/4" Screw — image 1
1 / 2

DJI Mic2 Tripod / Stativ Mount for Arca Swiss and 1/4" Screw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tripod mount for DJI Mic2 with support for Arca Swiss rail and 1/4" screw

Rating
5 / 5
Likes
6
Downloads
57
Makes
1
Views
549
Reviews
1

Updated at source:

Model information

Category
Audio
License
Creative Commons — Public Domain

Tripod mount for the DJI Mic2 microphones. Support for Arca Swiss connection and integrated ¼" tripod thread or with a hole for a threaded insert.

Print with support and with screw hole facing down. There is a 3mm hole above the screw to push the support material out with a screw driver.

Update 19.03.2024

  • Reduced slot height by 1mm and overall height as well.
  • Added “DJI Mic2 with Magnet Stativ Holder”. It supports holding the microphone while the magnet is attached to the clip. 

Update 29.03.2024

You can print this model with a 0,6mm nozzle. I used PETG. Threads may be a bit tight at first so slowly tighten and re tighten the screw until you have completely formed the threads. Or use a thread cutter for final cleanup but who has a ¼ thread cutter at home who is not one of those USA'sians living in the stone age…. 🙄

Tags