1 / 2
DJI Mic2 Tripod / Stativ Mount for Arca Swiss and 1/4" Screw — zdjęcie 1
1 / 2

DJI Mic2 Tripod / Stativ Mount for Arca Swiss and 1/4" Screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tripod mount for DJI Mic2 with support for Arca Swiss rail and 1/4" screw

Ocena
5 / 5
Polubienia
6
Pobrania
57
Wydruki
1
Wyświetlenia
545
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

Tripod mount for the DJI Mic2 microphones. Support for Arca Swiss connection and integrated ¼" tripod thread or with a hole for a threaded insert.

Print with support and with screw hole facing down. There is a 3mm hole above the screw to push the support material out with a screw driver.

Update 19.03.2024

  • Reduced slot height by 1mm and overall height as well.
  • Added “DJI Mic2 with Magnet Stativ Holder”. It supports holding the microphone while the magnet is attached to the clip. 

Update 29.03.2024

You can print this model with a 0,6mm nozzle. I used PETG. Threads may be a bit tight at first so slowly tighten and re tighten the screw until you have completely formed the threads. Or use a thread cutter for final cleanup but who has a ¼ thread cutter at home who is not one of those USA'sians living in the stone age…. 🙄

Tagi