Plastic Storage / Shelving Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to connect 2 shelving units together
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
I recently bought 2 storage/shelving units from Home Depot to house my tools and filament, but it turned out to have some missing pieces. No worries! With a calliper and 30 minutes, I was able to come up with a design that is stronger than the original and has a better fit.
I printed mine at 25% infill but I am sure it would have been fine at 15% too. I guess it depends on how strong you want it. Print with the topside on the build plate and you won't need any supports.
My first attempt came out pretty snug, so I would recommend playing with the scale (98% to 102%) depending on your printer's calibration and how the first print turns out.
(In the photos, the 3d printed pieces are the ones on the left/top depending on the photo)
Other than that have fun and all the best :)