Raspberry Pi 3B/4/5 Case with fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom Raspberry Pi case for Raspberry Pi models 3B, 4, and 5 featuring a snap-insert for a 30x30x7mm fan.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 137
- Makes
- 1
- Views
- 546
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
My set of Raspberry Pi cases for the Raspberry Pi 3B, 4, and 5 models.
This case features a snap-in 30x30x7mm fan with plenty of ventilation for cooling.
The Raspberry Pi 5 Cover also comes in a 40x40x10mm fan option and is a bit taller to accommodate the bigger fan.
Print the right pieces for your Raspberry Pi Model:
Raspberry Pi 3B/+:
- RPI3Coverv2
- RPI3Basev2
Raspberry Pi 4
- RPI4_Cover_V2
- RPI4_Base_V2
Raspberry Pi 5, depends on the your desired fan size
- RPi5_Base
- 30x30x7mm fan → RPi5_Cover
- 40x40x10mm fan → RPi5_Cover_40x40 Fan - Tall
If there is interest to have a 40x40x10 fan option for either Raspberry Pi 3b or 4, please leave me a comment and I'll make one.
Printing suggestions:
- Materials: PLA, PETG, ABS, or ASA (basically any)
- Layer height: 0.2mm
- Infill: 15%
- Orientation: Flat side down (you may need to rotate)
- Support: None
- Fans:
- 30mm x 30mm x 7mm:
- GPIO connector: https://a.co/d/9miMVWI
- RPi5 fan connector model: https://a.co/d/gsXFKD3
- 40mm x 40mm x 10mm (aka 4010):
- GPIO connector: https://a.co/d/5emkdeE
- 30mm x 30mm x 7mm:
- Hardware: M2.5x6mm countersink screws: https://a.co/d/hXLFhEx or https://a.co/d/erIIAfu