627 models
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
This case mount is a remix of the popular Rpi3b/b+ case by 0110-M-P. Other mounts I found used less ideal cases, and the mounting method wasn't the strongest. This version has all the great features of the original popular case, with an…
This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…
I modified the Rpi3b Prusa Mk3 Mk3s Frame Mount Case form 3D_Dynamics. I have used the case he based his design on on my old printer and the rpi would run a little hot sometimes. And I wanted it to look more like the Einsy case of the…
A cool looking Raspberry Pi 3B case inside Home Assistant logo :) The model uses 2 colors yet it designed to be printable on a single nozzle printer thanks to Z hop feature. The model has a GoPro mount which allows mounting the case on…
This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper. The case is sized…
Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…
A sleek, functional enclosure designed for the Raspberry Pi 3 Model B / 3B+ . High-performance cooling meets a minimalist, screwless design. ✨ Highlights Toolless Assembly: Precision snap-fit mechanism. No screws needed. Active Cooling:…
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
在转换到板版后，它更容易保存，可以作为礼物送给孩子，就像乐高一样。
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
Update 2: I've added multiple versions with slots for the camera cable and display cable. This means that now all possible usage combinations for GPIO, display and camera can be used. The .STL files indicate what slots are present in that…
A case for a Raspberry Pi 3B with a 5 inch display. I made this to be used with Octoprint and OctoDash... The display and Raspberry Pi just sit in the case and are held in place by the front cover, no screws. Front cover clips into place…
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Raspberry Pi 3b case with holder for attaching to the frame of Original Prusa i3 MK3S+. The case has no screws and the case and the pcb inside is held together by placing it in the holder (the case can not be used on its own). The holder…
I needed a top case that supports the 3.5 TFT screen of my Raspberry pi 3b+ and also can be wall mounted. I use the bottom part of Sneaks' modular case “__raspi_bottom__1_05-RP3BP V75.STL”. ----UPDATE-------- rpi_3b_screen_top_v2.stl…
A modular, 2 part, 19-inch rack mount for the Raspberry Pi 2B, 3B, 4B and 5B devices. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
Vented Case, SnapTop... This case is built for a cooler CPU when active cooling is used... derived from the need to cool the Pi 4B, The case requires a fan for significant cooling. This case will not cool the sbc by itself, but the…
This 3D-printed case, slightly inspired by the Amazon Echo Show, is designed to integrate a Raspberry Pi with a 7-inch display ( link ), offering a compact and clean solution for various projects. The Raspberry Pi is mounted on the back…
This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…
Raspberry Pi 4B / 3B+ / 3B / 3 / 2 / B+ rack mount case, based on this great case from "dktosoch". you need to print: for RPi version 4B 1x "rackmount_4b.stl" 1x "case_top_4b.stl" 1x "case_bottom_4b.stl" for RPi version 3 / 3B / 3B+ 1x…
NOTE This version is for a Pi 3/3+ See HERE for the Pi 4 version. I've seen many cases for mounting a Raspberry PI to the MK3 over the Einsy case. This mounts a Raspberry Pi 3B on the right side under the bed, which makes cable management…
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I…
(Update 2/7/2023) Added a fan version for Pi3B Lid. (Update 11/23/2022) Added a fan version for Pi4B Lid. (Update 11/14/2019) Added Pi4B Lid. (the bottom part is same as 3B, so please use "Pi 3B Bottom".) (Update 4/12/2019) Uploaded IGES…
I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…
I could not find a pi 3 case that fit my needs. So this is what I made. (Should also fit a Pi 2 and will be testing for the new Pi 3 B+ as soon as possible.) UPDATE Version 2: I have made a new version due to some issues with version 1. I…
I remixed this from Malolo and Haz1's ideas for a frame mount for the RasPi right above the Einsy board. There was a Raspi 4 model, but not a 3B, so I snipped and clipped them together :) You can mount it using an M3x10 screw from the…
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done by the community, too.You can find more details here: https://twitter.com/spikeinkent/status/1294704712101527553 The…
Sept 8, 2024 Update! With the release of the Raspberry Pi 5, I will be revamping the design to better work with the improved accessories that the RPi 5 offers (such as NVMe drives). These changes will require quite a bit of reworking,…
Yes, this is yet another Raspberry Pi case. Does the world need another case? Probably not. I really liked the 3030-mounted case from Coopey and thought the method of mounting via the 3030 extrusion slots was pretty sweet -- it was much…
Simple wall mount for the RPi4 armor case. Uses very little filament and prints quickly. I used PETG but PLA should also work. Has a nice fit and you can easily slide your Pi in and out after installing it to your wall. I printed the…
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
A case for the Orange Pi 3B. The case has a holder on the side for the Orange Pi external wifi antenna. My board is OP 3B V1.1.1 and it fits perfectly. May not be compatible with newer board revisions. 30/04/2024 V1 Update to include…
I needed a case for the higher profile waveshare PoE hat and so made this one. This was made so that the pi was completely covered while retaining access to all connections and allowing airflow. The PoE HAT model (B) case has no…
Staved off the convert to Octoprint for 5 months, wanted a slim adaptable case for various mounting positions in my enclosure. Loved the original Voronoi design but hate using hardware to assemble, redesigned for a snap fit enclosure and…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required
Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.
Case for Raspberry Pi 3B in 3 removable parts Boitier pour Raspberry Pi 3B en 3 parties amovibles (sans vis).
An enclosure for Raspberry Pi 3B+ board. It can be printed without any supports, raft e. g. Other RPi boards with the same layout of ports and connectors could be compatible with this enclosure.
Fits on this part: __raspi_bottom__1_05-RP3BP.STL in Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options von Sneaks I tried to avoid any black border arount the display without hinding any of the screen.
This is a Raspberry PI 3B case. This work was made from scratch using my PI Zero case but the original idea was based on this case: https://www.thingiverse.com/thing:3952272 I designed it with the following enhancement form the design I…
Messerschmitt Me-163B Komet
Case for raspberry pi 3b for mk3 using v-slot. You can use in left or right side of the printer. This version is for use with m3 25mm screw and nut. use supports for the holes of te screw and nut Print instructions Print in PETG with 25%…
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
This model is compatible with the lego system.
This is first attempt to case for Orange PI-3B I will try to prin it soon and let you know how to fit. TPU legs for silence (if you using fan) I did order big fan so will update new wersion when it comes. See you @next design )
This is a full size model of a 13B engine rotor of a Mazda RX7. This model does have supports on the bottom end, it is full scale and it will take up the print sheet on a mini be careful and try not to rush it. supports will be needed in…
A 6-inch Rack Mount for the Raspberry Pi 2B, 3B, 4B, and 5B. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Updates 02 August…
After printing @Carters Raspberry Pi 3B+ Case I needed a way to mount it so that I could pop it out easily if I wanted to update the RPi or do other diagnostics. So, I created this nice wall mount that can be attached with small screws,…
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…
A remix of a very nice case but with provisions for a PoE hat to be attached to the RPi.
This is my take on a case for an RPI 3B+ attached to a BTT TFT50 v2.1 screen with ventilation and access to the screen buttons. Useful for a remote klipper screen install, Homeassistant dashboards or anything a little touchscreen computer…
I printed it on ordinary cr6 se with standard PLA. I have used 0.16 layer for better resolution of marks and numbers.
My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…
Raspberry Pi 3B/3B+/4B Mount You will need x4 M2.5 screws with 3-8mm length to mount Raspberry Pi, x2 M3 nuts and x2 M3 screws. M3 screws length depends on where do you want to mount bracket Sizes were taken from…
for those of us who enjoy building our own engines, this tool is meant to help aid in setting the correct clearance between the side seal and the corner seal. Things you'll still need: 1) drill press with locking table 2) drill press…
printed in pla-cf Orca slicer about 1hr print time 0.2 layer hight 2 walls 4 top & bottom shells 20% infill gyroid
Speaker Adapter Ring - 165 mm x 40 mm Sturdy 165 mm (6.5") adapter ring, 40 mm tall, for clean aftermarket speaker installs. Designed for VW Passat 3BG / B5 and commonly compatible with other VW/Škoda models from the same era (verify hole…
Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…
1U 10 inch rack mount for your Raspberri Pi tested only with RPi 3b, should work with other model
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.). An optional cable guide for the pi-cam cable. No screws needed. Everything snaps together.. There are holes to attach the Raspberry to the bottom part using…
This model includes Bottom part of case Mount to attach with Original Prusa Enclosure You will need a top part of case from Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands by Malolo To mount the case, you will need…
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
I can't find any decent enclosure for Adafruit 3.5 PiTft with Pi 3B. So, I decided to make one. To display MagicMirror stuff like weather, news feed, upcoming calendar events.. etc on my desk. You can find more information about…
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…
Case for Raspberry Pi model 3B
A neat and easy to install octoprint enclosure to fit an Ender 5 / Pro Unlike other similar designs the base of this enclosure is separate from the upper half so installation is much simpler This design is to suit a Raspberry Pi 3B+ You…
Case for raspberry pi 3b for mk3 using v-slot. You can use in left or right side of the printer. there is a new version with holes for screws and slot for raspberry pi camera…
Shaker mount for MHW-3Bomber Blind Shaker, fitting the DF64 (Gen 2). Fits the lid as well just under it.
WARNING Use flush cutters to cut out a piece of the “Cover” that presses against the SD Card. When modelling this i did not account for the SD Card protuding, so the cover will press against it and that can break the SD Card Slot.…
[GER / DE] Anpassbares Raspberry Pi 3B+ Gehäuse (Schrauben los) Dieses Gehäuse ist für einen Raspberry Pi 3B+ gedacht. Es sollte auch direkt schließen und brauch keine Schrauben. Er hat vorbereitungen für die Aufnahme eines 40x40x10…
Darealmoo made this really good and simple DIN-rail mount for Raspberry Pi ( Din-Rail Mount for Raspberry Pi 3B+, thing:3369750 ), I just did a small modification to be able to mount the Raspberry pi in a portrait way, so my Ethernet and…
I attempted to make the added holes fit with the original aesthetic of the vents. Note: The hole for the HDMI port in the cover photo is slightly larger than the one in the included model.
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
This is a Raspberry Pi 3 B/B+ case that was built to allow a Noctua NF A4x20 5V fan to be installed internally. The fan is mounted at a 5 degree angle to help push the air out of the vents located on the side. Print instructions [UPDATE]:…
I remixed this design to mount my 3.5 touchscreen and a Raspberry Pi 3B+. The mounting holes for the RPI are oversize so I could use some M3 screws I had here. You will either need to open up the holes in your PI or make the ones smaller…
This is a sleeve style case for a Raspberry Pi 3B+ to allow you to attach your Octopi server to the bottom of your Ikea LACK enclosure, or to the wall of a cabinet, etc. It makes it easy to mount or unmount the Raspberry Pi for updates or…
I looked for a case for the RazBerry Modul with a fan, but I didn't found one. It was important for me, to have no screws so I changed the top of the case and the height to have enough space for the fan and the module. RaZberry Modul
This model is compatible with the lego system.
Notes: Phase offset 100mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
This is a replacement part for the interior hood release handle bracket (VW part #1K1823633B), which connects the hood release handle and the bowden cable. If this part is broken, your hood release handle can't work properly, preventing…
For fix the cap I use tiny neodymium magnets of 5x1 mm The case has space for 2 or 3 step down DC converter for LED lightbars or fans, Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Resolution: 0.16 Infill: 60% Filament: eSUN…
Ich habe diesen Adapter designt weil es mich gestört hat das meine RedBull dose immer in der kurve umgeflogen ist und vw erst bei den nachfolgenden Modellen kleiner dosen Halter entwickelt hat.
This .3mf file contains three Raspberry Pi Case Designs. one for the Pi 1B and A models, one for the Pi 1A+ and 3A+ and one for all other Model B revisions (1B+/2/3/3B+/4/5) There is also a case for the Raspberry Pi Zero and Zero 2W. a…
Original design by falken_gt4. Thank you for sharing. Osoyoo 5" touch screen https://www.amazon.co.uk/dp/B07KJBCNS8?ref=ppx_yo2ov_dt_b_product_details&th=1 I added an insert to the front as well as re-sizing the enclosure to accomodate…
This was a fun project. I remixed the original design to include a power button for the Pi, a 0.91' OLED display and use M2.5/M3 screws and brass insert nuts to hold everything together. I'm going to use this as an OpenWRT based travel…
Raspberry Pi 3B behind Monitor Mount With 40mm Fan Mount I changed the Fans of my Ender 3 Pro. Hotend 2x 12v (one for Mainboard 1 for Hotend serial) Coolingfan 2x (one for Raspberry one for Print cooling) Make sure your printer is correct…
Summary Since the very first moment I got the Sovol SV06, I thought about placing the Pi below the screen, so I present to you a three part design to accomplish that in an easy way. First part is a cover which snaps on directly onto the…
A 10-inch rack mount for one Raspberry Pi and one JetKVM devices. Compatible with RPi 3B, 4B and 5B. This Model is a Remix of @Mauker's 10 inch rack series. You can check out the others here . Required parts RaspberryPi 4x M2.5 thread…
I couldn't find a Raspberry Pi 3B+ case compatible with the kind of cooling fan that I have. So I decided to make one myself! Category: Electronics
I modified the original files to add a honeycomb texture and a write. I don't have the MMU2, so i printed the things separately and then assembled. I upload the .gcode with 0.3 mm layer height, but for the screw, the write and the top…
MMDVM based HAM radio hotspot. See original project description and differences section (below on the page) for this project. Using https://www.pistar.uk/ software. Note - solder JP1 pins on hat together to be able to upgrade hat firmware…
![[UPDATED] Raspberry Pi 3B/B+ Case with Noctua Fan](https://media.printables.com/media/prints/3914/images/300673_2b912598-9322-408c-874d-34f507b0cf49/card_preview_rpi_casewfangpiotop_v1.jpg)
