Wall planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Floating, no visible screw holes, clean, modern, timeless.
- Rating
- 5 / 5
- Likes
- 157
- Downloads
- 351
- Makes
- 1
- Views
- 2,319
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Standard Digital File License
https://www.buymeacoffee.com/maxt
----------------------
SETTINGS / PRINTING (recommendation)
Filament: PETG or PLA. Please note that PLA can deform/break down in the sunlight. In addition, some types of PLA are biodegradable.
Print: 0.2mm
Nozzle: 0.4mm
Support: Yes, tree/organic - inside of the bowl (see the last image)
Print orientation: On the backside
Brim: No
Infill: 100% (solid), to minimize the probability of holes and water damage to your wall
Perimeters: at least 6, even better 15, to minimize the probability of holes and water damage to your wall
OTHER
- If you are worried that the planter might leak, use a waterproof sealant spray (for example Rust-Oleum Crystal Clear) inside the planter, 3-4 coatings should be enough.
You could also read the official Prusa blog post “Watertight 3D printing PT1: Vases, cups and other open models”.
- To make the planter smooth and shiny, use sandpaper, prime it, (spray)paint it a couple of times, and use a varnish coat on top.
Happy Printing!
--------------
