Voron V0.2 squash ball feet (replacements for the rubber feet)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the Voron V0.2 rubber feet with squash balls (two yellow).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a replacement for the standard Voron V0.2 rubber feet with a two yellow dot (extra slow) squash balls. You've seen these for sure for other printers. I needed these to reduce vibrations and sound transmissions from the printer to the desk and floor.
Additional parts needed: 4x M3x50 screws - one for each foot
You have to unscrew the accent part on the feet, the rubber feet and the M3x40 screw which holds the skirt part in place. Add and align the spacer, use a M3x50 screw where the M3x40 screw was used and reuse the screw from the rubber feet. Repeat the steps for the other feet and redo your input shaper calibration afterwards.
The benefits of these feet: Vibrations and noise transmission from the printer to your desk and/or the floor are completely gone. The downside: The printer becomes a bit more wobbly which will not help your input shaper results.
