Chamfer Guide for Block Plane. Magnetic!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.19 net (excluding VAT)
For file: rt Lft Washer_0.4n_0.2mm_PLA_MK4IS_14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Guide allows you to make perfect chamfers on your woodwork. Always the same angle and depth. Snaps on with magnets
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 137
- Makes
- 0
- Views
- 1,033
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This model comes with 2 rails and 2 brackets. The rails snap onto the bottom of the plane and the brackets bolt onto the rails to help with aligning the rails. There are hash marks on the brackets so you can always go back to the same depth of cut on your chamfers. Feedback and Makes appreciated. Happy Printing!
Hardware:
4 M4x.7 25mm Hex Head bolts
4 Washers (these sit under the brackets to give enough space for the chamfer)
4 M4 Nuts
6 8x3mm magnets
You can use the knobs of your choice I really like these. https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support
Edit: I added custom washers that register in the brackets and rails. I also widened the recess for the plane blade.