Compact Hitbox Style Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a Hit-box style controller I designed in fusion 360, the outer shell is purely for aesthetics and does not need to be printed although you would need to accommodate with a shorter screw. This design uses a Raspberry Pi Pico as well as GP2040 Firmware. The mechanical switch mounts as well as key-caps are not my design and are linked and credited below. Thank you for checking it out, this was a blast to make!
Parts list:
1 x Raspberry Pi Pico
1 x USB-C Breakout Board
4 x Threaded Inserts
4 x M5 Screws
12 x Gateron Mechanical Switches
5 x Momentary Tactile Push Button
3D Printed Key-caps and Housing:
All credits to Rana Labs
12 x Housing (bottom and top)
12 x Key-caps