Anycubic Kobra Lateral Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a filament guide for Anycubic Kobra, ideal if you have a filament holder on the side of the printer.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 123
- Makes
- 1
- Views
- 782
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a filament guide for Anycubic Kobra, ideal if you have a filament holder on the side of the printer, or in my case a dryer. It guides the filament from the side, and can be mounted in the two holes on the printer sides of the upper frame. You need one 608ZZ bearing also (8x22x7mm) for the pulley and two M2.5 screws.
UPDATE Feb-18-2024: I've added a stopper for the axis
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
If you position corretly in the slicer every part, it can be printed without supports.
How I Designed This ===================
I've used Fusion360 to project the parts, the pulley and the axis were designed to join the carrier part to form a "tunnel" in which the filament is trapped and can only slide flawlessly on the pulley rail without ever going off.
I designed this tool because the other filament guides did not satisfy me, many were designed to still have the spool on the printer frame or to get the filament back. But I needed something to guide the filament from the side.