Counting matching models…
This bracket allows you to install two 3.5" HDDs anywhere you'd like. Intended for computer case modding. Make SURE you print two of these, one NEEDS to be a mirror of the other. This is easy to do in your slicer software. You'll need a…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
So I was making a conversion on an old World Tour guitar for a colleague. I decided to use the original motherboards screws etc so I made a holder for the Pi Pico I used. It fits nicely and you can run all the wires and dual SW520D as a…
After replacing my old espresso machine with a new one, I struggled to completely give up the good old companion that had served me well for the last 15 years. So, how do you deal with a worn-out and filthy machine that you still somehow…
A couple of parts to replace the battery tray and RX/ESC tray and move them lower down. Also includes braces to replace the stock trays to save some weight and space. You can use the included hardware, although for the battery and RX/ESC…
Multiuse Bracket for modding parts onto the simrig, basically just a base so you can add platforms to put things as keyboard, controllers, even a base for flight simulator controllers, free to imagine, posting both the bracket with the…
This bracket allows you to install two 3.5" HDDs anywhere you'd like. Intended for computer case modding. Make SURE you print two of these, one NEEDS to be a mirror of the other. This is easy to do in your slicer software. You'll need a…
A jig with a variety of holes and slots for the different lighter mods I do. Unlikely to be of much use to other people, but I'm uploading it anyway so I won't lose the files - and in the unlikely event someone may find it useful. Takes…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
I wanted better temps for my system so i modded a duct for fresh air intake and a mount for 2x 120mm fans in the bottom. For the 2x 120mm Fan shoud in the bottom you need to cut out some parts that are in the way and also need to remove…
So I was making a conversion on an old World Tour guitar for a colleague. I decided to use the original motherboards screws etc so I made a holder for the Pi Pico I used. It fits nicely and you can run all the wires and dual SW520D as a…
for voron 300*300*300mm (buil volume) need 4 glass plate (420*420*4mm) and a backplate (420*440*20mm) need M3 insert, M3 screw ((most of them are 8mm) aprox : 160), and T-nuts 2 spool holder, a double in outside and a double inside to dry…
Please refer to the original model page for full details, as the only difference in this version is the location of the main fan. Ensure you cut only the marked fins and seal the fan with tape, as I have removed the screw holes to achieve…
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
Generally speaking, the typical rules and courtesies for modding and reselling files within the NERF community apply the same for most of the models provided in and by the Magazine Speed Loader (MSL) system, just follow the licencing…
a new version of my ptfe plug, this will help with the feed angle (45 degree up/down/left/right) to avoid the rubbing that my original sometimes got depending on the filament. A benefit of this new design is it is suitable for feeding the…
more RGB for more FPS??? 😁😂🤣 Rafts: YES for LED Lens Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Scale your needed size in your slicer! Print LED LENS in PLA in White or transparent and vertical with brim function
Avendo un HTPC con Antec Veris sul quale era montato un'alimentatore originale da 350W e avendo motanto sopra una scheda grafica GeForce GTS450 che consumava parecchi Watts ho dovuto necessariamente aggiornare l'alimentatore con uno piu…
This is a component set for the VXE VGN Dragonfly R1 ( NOT SE, Pro, Pro Max). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is reasonably-well…
This is a component set for the Redragon G49 Pro ( NOT SE or Base Model). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is actually a bit of a mess,…
This is a DIY starter kit, you NEED a base model Kidztech 1/6 Yamaha and you WILL have to cut parts of it and add hobby grade electronics for this to work at all ! I can help for difficult parts, just ask in the comments APRIL 2019 UPDATE…
