CM275t mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount suits the CM275t all in one FPV camera and transmitter on copters with a 16mm electronics stack at 45°. The…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This mount suits the CM275t all in one FPV camera and transmitter on copters with a 16mm electronics stack at 45°. The camera lens is centred on the craft so weight is shifted slightly off centre. The camera has 10 degrees of tilt which I find is fine for a small 1S build flown indoors.
The copter seen in the photos is a PepperF1SH inspired build using the TinyFISH FC and a ESC/Frame combo of my own design details of which can be found on my blog.
Print Settings
Supports:
No
Resolution:
0.2mm
100%
Notes:
Wall thicknesses are designed for a 0.5mm extrusion width.
After printing drill the mounting holes to 1.5mm and then tap with an M2 thread.
A small dab of hot glue in the bottom of the mount will keep the camera locked in place.
Category: R/C Vehicles