Reer Radiant Heater 1928 2in1 FeelWell Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler to raise it additional 10 cm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler that raises the heater head additional 10 cm to further increase the distance from the baby's changing table.
The extension has to be printed in a material with higher heat resistance. PLA could already get soft as the extension is close to the heater. PETG works fine for my unit. Both parts can be printed in the provided orientation without support. I used the following settings:
- Material: PETG
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Walls/Permimeter: 3
- Top/Bottom Layers: 4
- Infill: 20 %
- Support: No
- Brim: Yes
The extension sits on top of the stand and is secured with the original thumb screw. The heater unit fits only in one direction onto the extension. The printed bolt makes sure that it doesn't come of easily.