1 / 2
Reer Radiant Heater 1928 2in1 FeelWell Extension — zdjęcie 1
1 / 2

Reer Radiant Heater 1928 2in1 FeelWell Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler to raise it additional 10 cm.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
316
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler that raises the heater head additional 10 cm to further increase the distance from the baby's changing table. 

The extension has to be printed in a material with higher heat resistance. PLA could already get soft as the extension is close to the heater. PETG works fine for my unit. Both parts can be printed in the provided orientation without support. I used the following settings:

  • Material: PETG
  • Nozzle: 0.4 mm
  • Layer Height: 0.2 mm
  • Walls/Permimeter: 3
  • Top/Bottom Layers: 4
  • Infill: 20 %
  • Support: No
  • Brim: Yes

The extension sits on top of the stand and is secured with the original thumb screw. The heater unit fits only in one direction onto the extension. The printed bolt makes sure that it doesn't come of easily.

Tagi