Liczymy pasujące modele…
Telecharger le fichier PDF pour avoir le tuto complet avec les images Comment créer votre propre figurine avec l'I.A ? Partie 1: Avant de vous lancer dans cette aventure et pour bien faire les choses, il va falloir vous préparer à la…
Pour les personnes qui on deja utiliser mon premier tutoriel disponible ici : CREER VOTRE FIGURINE AVEC L'I.A par PéPé Stéf | Téléchargez gratuitement un modèle STL | Printables.com Passez à l'ETAPE 2 du tuto ( le tuto en PDF est à…
Meet Freerunner. Like the summary says, it's a half-dart, micro-wheel, mag-in-front, battery-in-grip, semiauto manual pusher, 80-175fps pistol-format blaster. I like to think it's pretty good. Pretty quick to print (10.5hr of print time…
Introduction If Freerunner was so cool, how come they never made a Freerunner 2?! Well here it is. Now it's more aesthetically pleasing, shorter overall, with an all-new grip, and a shorter trigger pull for faster firing. Still capable of…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- This is an extended muzzle/front end for the…
Le puzzle de Winston Freer fait partie de la catégorie de ceux dans lesquels, lorsque l'on modifie la place de différentes pièces, la place prise par le puzzle change. Ma vidéo youtube sur ce puzzle :…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- This is a new upper for the Freerunner v2 which…
Original designs more or less weak backplate did not quite fit with my need to make sure it doesn't fall down on the baby. I made it more sturdy and printed it in ASA with 6 outer walls and 60% infill. Wonderful work on the CAD data from…
I received an XTEINK X3 for my birthday and wanted to carry it around with my keys, but I am scared that the screen may crack easily even with the case, so I whipped this up real quick on OnShape. This attaches to the e-reader over the…
Remix of Chance's Freerunner blaster to include a foregrip, an alternate spiky front, and pic rail with sights
Thule FreeRide 15mm axel mount Mounting mountain bike forks with 15mm through axel forks on the Thule freeride bike rack. Holes in mount are made from M6 bolts.
KTM Freeride e start button, in case of a broken one unscrew the hole throttle grip and put in the printed one. Attention to the spring and the little steel ball in there. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No…
Drawn from a bad quality jpg, supposedly is capable of 8kw (peak?) They supposedly sell it in 8mm and 10mm…
Additional Parts: 2 x M6 hex nuts 2 x M6 x 25 mm hex screws 4 x M4 x 35 mm allen screw 4 x M4 hex nuts 2 x M3 x 8 mm allen screw 2x M3 x 4 inserts 2 printed M6 knobs Print: GreenTechPro or other stiff material no Support
Summary Save valuable energy when operating the baby food warmer and keep dust away. When the cap is on, the heat is kept more reliably in the water bath and energy and water consumption is significantly reduced. We use the baby food…
Freerunner is honestly a great blaster that I genuinely think more people should be using, especially for HvZ games. And when I moved back into my college apartment and got an A1 mini for my small room, I was pretty upset when I realized…
I designed this to allow the mounting of the O4 camera into the Hyperlite Freerange Switch frame. In DJI's infinite wisdom, they decided to change the mounting holes of the O4 cameras to a strange and dubiously useful 16mm pattern that is…
Additional Parts: 4 x M6 x 50 mm L-screws: https://www.ebay.de/itm/123620430705?var=424477351005 4 x M6 cap nuts 4 x M4 x 35 mm allen screw 4 x M4 hex nuts 4 printed M6 knobs Print: GreenTechPro or other stiff material a few Support
Got the radiant heater without the mounting bracket and it cannot be bought separately. Model is sturdy enough with 5mm walls. The openscad file is included to adjust it to your needs. Category: Replacement Parts
Printer: Prusa MINI+. Filament: eSUN PLA+, 100% infill. Printed grinding groove towards the plate with supports only in the groove. The holes print fine without supports. Additional parts needed : Hollow and threaded axles to screw the…
High-performance air filter for KTM Freeride
Parts I made for my Hyperlite Freerange Frame. Specifically for DJI camera and Crossfire nanoRX/Immortal-T. The HD camera mount is meant to be used with the Caddx Peanut. Screwed on the front and clamped to the top plate in the back.…
An insert for using longer screw with Thule FreeRide roof top bike rack. The rack cannot hold bikes with wide frames such as e-bikes. The insert makes it possible to replace the T shaped screw with a longer M8 screw to hold a slightly…
These are shims for the ATK freeride spacers with a single screw. At this point I believe all newer versions have 2 screws and are not compatible with this shim. If you have an older freeride spacer and need more shims, this file should…
A tool to easily stack two or more Thule Freeride 532 (and possibly other models) on top of eachother.
This is a GoPro mount for the new Hyperlite Freerange Switch frame from Pyrodrone. Some folks on the Pyrodrone Discord were asking for a simple mount, so I cooked one up from their measurements. This mount should be able to use the…
This is a replacement for the stock fabric/webbing/Velcro strap that comes installed on Fluid Freeride Mosquito scooters. It is a clamshell design consisting of 2 pieces that “clamp” around the base of the stem of the scooter, just above…
I designed this simple pipe clamp to attach a heat lamp to the winding table, so I could avoid the bulky base plate.
If you want a break with your FPV Freerider training with TX Spektrum DX7 ... you need stand :) Print Settings Printer Brand: RepRap Printer: DIM200 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 - 0,4 Infill: 10% Notes: I made it…
ball detent lower. uses a 6x7mm that is recommended to glue in but to not use too much glue. follow normal print orientation as normal.
Make your own parking!! I made it with the lasercutter but you can also made it by a 3Dprinter servo boxes not included! materials that you can connect: Utrasonic sensor, RFID-sensor, LCD-display The code is very easy, ask this to AI and…
The Chance Freerunner v2 Picatinny-Back Grip Stock Point is a simple modification of the battery door that includes a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock, this rear tactical rail is also…
Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler that raises the heater head additional 10 cm to further increase the distance from the baby's changing table. The extension has to be printed in a…
Tip for Gardena, and similar, root watering system. Inserts into 10mm pipefitting, see reference image. Printed in PETG. The bottom of the tip should print about 10mm to fit snuggly into the pipe.
This is a ‘quick lift’ handle that installs on the upper stem of the Fluid Freeride Mosquito scooter. Intended use is to aid in quickly picking up the scooter from the stem to navigate stairs, curbs, gaps, etc, without needing to collapse…
A holder for a termometer.…
Just a battery door extention for a Chance Freerunner Blaster.
A space saving spool holder/filament guide system for use with the Prusa MMU2. Low drag on the filament. Drag does not increase as much as spool empties. Less tangling of filament behind printer/keeps looped filament up and clear of…
Our stair guard has a few holes for width adjustment. This print covers the holes which are not actively used. Print with low layer height, 0.1 mm worked fine for me.
I used a 0.3mm Nozzle, becaus at some Points the Lines ar very small together. A nice looking Color is to print it with black and withe or brown, or in my case with white and brown.
The heat set inserts are m3 by 5.7mm ish. The numbers after the v.1 are in reference to the position of the lugs first hole from the wheel bump closest to the hole. example v1.1.80 means the first hole is 1.8 in from the flywheel bump. If…
A imprimer en PLA. Pour ce type de barriere: https://www.galaxus.ch/fr/s10/product/reer-barriere-de-securite-a-visser-basic-barrieres-de-protection-22030340
a single 6X7mm ball detent, glued in. can get on Amazon or Out of Darts
THIS MODEL IS FOR PERSONAL USE ONLY AND THE USER ASSUMES ALL RESPONSIBILITY, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY AND/OR DEATH. BE AWARE THAT IT MAY CHANGE THE RELEASE CHARACTERISTICS OF YOUR BINDINGS AND I AM NOT RESPONSIBLE FOR…
This is a replacement spacer for the stock freeride spacer for the ATK Freeraider bindings. Current model does not identically mimic the original design, but it does fit and work. Model is set to 2.2mm in height, scale appropriately for…
This is a wall to prevent robot vacuums from trying to climb up the foot of the Reer 1909 changing table heater. The foot has a diameter of 50cm so the wall should suit any other thing with this dimension. Printing 8 of these should give…
tpu gps and antenna mount
This is a remixed Freerunner V2 made by Chance , but with a cooling fan installed in the front to help with heat regulation during games. I used this thing for an entire day and it NEVER overheated (I had the fan on the entire time) and…
Used KptnAutismus extended thumb piece onto an extended Freerunnner mag release, plus made mag release 1cm longer, added gonking pcar onto the orange tip EDIT 19/06/26 - added a picatinny upper, with added sling point, and added mantis…
Freerunner has some nice fidlock/midlock attachment points, but no sling points, so I added one. Just replace the upper, everything else is exactly the same.
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
the left steering hub for h16bm hypergo
I think the career ability worth a specific point marker and build it. BTW, Flash Point is really a good game.. This model is based on Action Point maker(19.2 x 2x2) and I create it with 19x2.2 due to it need some tolerance for printer.…
The reer 2in1 FeelWell Heater (1928) Mount allows you to securely attach your freestanding changing table heater directly to your IKEA Malm changing topper (specifically designed for schwedenbaby.de toppers, maybe fits also other changing…
I still use several older Thule FreeRide roof bike carriers. While they work perfectly, they were originally designed in an era when 26-inch bikes were the norm. Modern 29-inch mountain bikes, especially in L and XL frame sizes, are…
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
I wanted a tape holder that does more than play this singular function. Behold the tape holder and freer of tapes! The tool is readily adjustable and comes with spikes to help lift up tape that slips and becomes flat on the roll (which is…
