reer 2in1 FeelWell Heater Mount (1928) for IKEA Malm Schwedenbaby
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Securely mount the reer 2in1 FeelWell heater (1928) to an IKEA Malm with schwedenbaby changing topper.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The reer 2in1 FeelWell Heater (1928) Mount allows you to securely attach your freestanding changing table heater directly to your IKEA Malm changing topper (specifically designed for schwedenbaby.de toppers, maybe fits also other changing stations). This space-saving design eliminates the bulky floor base and keeps the heater safely positioned for your baby.
Assembly
Hardware Required: 6x M4x30mm screws, 6x M4 hex nuts, 6x 3.5x16mm wood screws, and a strong adhesive strip (e.g., Tesa Powerstrips).
Printed Parts Needed: 1x Top Bracket, 1x Middle Bracket, 1x Bottom Bracket, and 3x Pole Sleeves.
The nuts needs to be inserted first!
Screw the Top and Middle Brackets to the changing station topper using the 3.5x16mm wood screws.
Attach the Bottom Bracket to the station using your adhesive strip.
Connect the top and middle sections of the original heater pole, set it into the mounts, and clamp it securely using the Pole Sleeves, M4 screws, and hex nuts.
Print Settings
Orientation: Print all parts flat on the build plate for maximum strength.
Wall Count: 4
Infill: 35%
Material
PETG is highly recommended for excellent durability and slight flexibility when clamping.
PLA will also work perfectly fine for standard indoor nursery use.