Save energy every night! Parametric cap for baby food & bottle warmer (& reer model no. 3310)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitting reer "Simply Hot" (Model No. 3310) and other warmer (parametric Fusion file included!)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Save valuable energy when operating the baby food warmer and keep dust away.
When the cap is on, the heat is kept more reliably in the water bath and energy and water consumption is significantly reduced.
We use the baby food warmer continuously every night to keep water warm for baby milk powder - the cap ensures sustainable energy savings and a perfectly set temperature at all times.
Compatibility
predesigned .stl file: fitting reer Simply Hot (Model No. 3310)
.f3d file: parametric file to customize the cap to your needs
Print
I printed mine in PETG, but PLA is also suitable.
I used 0.22mm layer height with variable layer height (+-0.07mm) for smooth roundings.
No supports.
10% gyroid infill.
Print in the given orientation (up side down).
Happy parenthood!
Do you like my work? I would be very happy if you would support my work on Ko-fi.