1 / 4
Dillon XL-650 Primer Rod Holder/Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Where to put that primer rod when the primer feeder is empty?
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 216
- Makes
- 3
- Views
- 1,162
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Where to put that primer rod when the primer feeder is empty?
Print one or two of the clips and now you have a place to put that rod - just clip them on the safety primer tube and store the rod when not in use (see photos).
Also works with Dillon XL-750.
Shown model is printed in Devil Design PETG.
>> If you like the design, please leave a like, rating or a tip... :)
Print Settings
0.20 mm layer height, 25% infill
No support or elephant-foot compensation
2 perimeters, 3 top and 2 bottom layers
No post processing needed