237 models
Reloading primer flip/flipping trays. The flip tray comes in three sizes: 50, 100 and 125mm (2", 4" and 5"). For reloading with standard primers the 100 mm tray is great (common used size), but reloading with Federal, the larger 125mm…
This is a remix to use 9 mm garden hose with this spent primer catch. These hoses have a 15 mm outside diameter which fit snug into the device. It is necessary to shave off a bit inside the hose to prevent that spent primers get stuck…
Test para revisar primeras capas. Imprimir con altura de capa 0.2mm. Se podrá ver la calidad de la primera capa en una superficie de 120mm*120mm Se podrá observar la calidad en 5 Puntos repartidos en las esquinas y centro con una altura…
I recommend to use PETG or hard TPU so the claws are flexible and won't break.
This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…
Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…
Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary. I designed this version so the pick-up end of the tube would just…
A printable small and rifle or pistol primer. These are good for safe firearm function testing, they allow the gun to be dry fired against the plastic primer. After snipping these apart, I used a Lee hand primer to load these into my 9MM…
About Any owner of the RCBS Rockchucker IV knows it's a great reloading press for making high precision ammo, but the primer catch is horrible. This improved primer catch is optimized to catch every primer and leave extra room where you…
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
This is part based on https://www.thingiverse.com/thing:2809150 but redesigned from scratch for better fit and for 3D Printers (no aluminium required). Use PETG or better. You should use spring and ball or screw with rounded head as a…
This is 100% GMVB's design from another site, full credit to him. I just wanted a copy in a place that doesn't force feed you ads as well as a backup in case it disappears from there (as I have seen with other designs). Original is…
Un topper para pastel de primera comunión. Hecho con PLA Teal de Polymaker. Impreso en Prusa Mini.
Español: Modelo STL para verificar nivelación de cama de impresión de varios tamaños. Inglés: Multiple size STL model to check print bed leveling.
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
A case for the gunprimer raser origin glass file. Can use any material The top case friction fits onto the top. Designed with 0.2mm layers in mind. Print both models with the openings facing upwards.
This is a remix of BigMrTong's original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added text to the front for quick reference to the primerHave used these on my reloading bench for several years and just love…
Faire attention en retirant les supports sur les parties fragiles. Voici TriceraChou , le dinosaure le plus attendrissant de la préhistoire ! Avec ses cornes toutes rondes, sa collerette stylée et ses petites pattes trapues, il fait…
A two part case for the Gunprimer Raser + Glass file. The lid is designed to pop on and lock by friction fit. Designed with 0.2 mm layer height in mind. Print in whatever material.
There are other Rock Chucker primer guides, but mine uses 5x3mm magnets. I also include the F360 file so you can tune and adjust this as necessary. Since different Rock Chuckers have a different length slot in the ram, I provide both a…
Hanger for the primer follower on the Dillon RL1100. I assume this will fit other models but I haven't tested it. The inside diameter of the clamp is 14.2 mm. Let me know if you have any feedback. Filament: eSUN PLA
Simple snap cap design inspired by Dboyds. I had some trouble with sizing and also made a slight modification. I am proposing the use of this snap cap in connection with an established firearms course related to my employment. With my…
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
I was not satisfied with the stability and solidity of the attachment of the Primer feed body Stabilizer so I design a clamp. First model is only compatible with 550C frame so I design a second version to fit with 550B frame
I designed these to work with the 7/16" OD vinyl tubing that comes with the Hornady Lock-N-Load AP reloading press. After raiding our bathroom travel basket, I found a container that I thought would work perfectly for spent primers. It…
Very simple STL to print the body of the primer buzzer. The body of my 40+ year-old primer buzzer was cracking and falling apart. I designed this to use as much of the original as possible. I also used the original screws and heat set nuts.
Letrero de Primera Comunion para colocar en tortas y pasteles
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
This is a remix of Bruce's Winchester sized primer dispenser along with the original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added pegboard pegs on the back of each so I can hang them to make room on my…
Where to put that primer rod when the primer feeder is empty? Print one or two of the clips and now you have a place to put that rod - just clip them on the safety primer tube and store the rod when not in use (see photos). Also works…
2.5'' SSD/HDD insert for serves like the Fujitsu Primergy rx2540
spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…
Small pistol primer press that utilizes Lee shell holders and about $1.50 of hardware. Please utilize the readme for print settings, disclaimer, assembly, and additional info for the plunger. Use PLA pro.
I took BigMrTong's excellent CCI primer dispenser and increased the size by 10% so Winchester primers will fit in. https://www.thingiverse.com/thing:2939986 I also tested it with Tula and Wolf primers. Caution - If you are using CCI…
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Printed with Sunlu PLA+ Infill 100% Prusa MK4S After breaking the original I modeled a replacement parts with the same sizes. Lee Precision SKU: BP5572F Reinforced the ring where the spring is hold. Fits as it is, no need to resize. Note:…
A "quiver" to hold Hornady LNL small/large primer tubes and pickup tubes. Can be fastened to your reloading bench via the 4mm holes at each corner. Printed on Prusa Mini+ with Atomic PETG (using generic PETG settings), 15% infill,…
Hand priming can be painful after a few hundred rounds. I designed this snap over grip for the RCBS hand primer so that I can use the full leverage of my palm. Additionally, there are shields for between your thumb and index finger, as…
Replacement fastener for RCBS Primer Catcher fastener. If you reload your own bullets, and have an RCBS reloading press with a primer catcher, but have broken or lost the little crecent-shaped fastener piece that holds it in place,…
Do spent primers like to escape out the front of your Rock Chucker ram when you're decapping? This plug will fix that. To install: Raise the ram. Slide the plug in from the front until it is sunk below the outer surface of the ram. Lower…
Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.
Works for Fujitsu Primergy TX1320 M3. Tool-less installation of 2.5" drives. My print settings: 0.6 Nozzle 0.25 mm Layerheight Fill pattern: Rectilinear Fill density: 50% Brim type: Outer brim only Brim width: 2 mm The Model:…
Primer stick that I must admit offen also ends up as a painting handle for batch painting and painting lager models. Therefore it can double as a painting handle just fine as well I use poster putting to attach models. For GW models I…
The Spent Primer Box is designed to be mounted under the workbench. A conventional 15 mm hose fits into the holder. Suitable for the RCBS Rockchucker Primer Catcher Remix V3 https://www.thingiverse.com/thing:4250348 However, it can be…
Print in TPU for gas resistance, flexibility and durability. DO NOT print in PLA, ABS, PETG, etc. Flange diameter is about 19mm and bulb diameter is 15.7 mm at base.
A replacement platform for holding shotgun shell primers using a Lee Load-All press. Category: Replacement Parts
I created a lid for the CCI Primer Dispenser to help close them off and make the stackable on the reloading bench. My remix of the original CCI Primer Dispenser that includes text for the primer size/type is located at:…
You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…
Vassoio per la raccolta inneschi spenti per Pressa per ricarica munizioni RCBS Rock Chucker. Gli inneschi vengono raccolti meglio rispetto al vassoio originale. Non cascano a terra e rimangono raccolti e pronti per essere smaltiti.
Just started painting some 3D models. Ran into an issue where the primer cap clogged, and became a bit of a nightmare to clean it and fix it. Decided to just model one since I couldn't find one to buy or ready to print anywhere. First…
Read the included RCBS Primer Feed.pdf for more info.
I found myself with tons of loose sleeves of primers. this holder holds 10 sleeves, (1000 primers) and supplies structure if you want to vacuum seal them, so they don't get crushed, I've tried to create this to use as little filament as…
(Don't speak to me or my son ever again!) I designed two primer dispensers for small primer boxes Print instructions Unassociated tags: primer dispenser, small primer Category: Tools Summary (Don't speak to me or my son ever again!) I…
This is a replacement for the original spent primer cup used on Dillon 650/750 presses. Instead of the stock plastic cup, this design features: A connector for a hose with 16 mm outer diameter / 12 mm inner diameter – making it easy to…
Ajoutez une touche chaleureuse à vos soirées d’hiver avec ce flocon décoratif pensé pour accueillir une bougie LED. Facile à imprimer en une seule pièce, il combine esthétique et sécurité : pas de flamme, juste une ambiance douce et…
Commentaires Je suis parti de la cage fictive servant de cache quand il n'y a pas de disque dur dans les emplacements du serveur. Ceux-ci ne pouvant accepter aucun disque, j'ai adapté la forme pour des disques en 3,5". Ce modèle vous fera…
Live primer catch with removeable box. It's probably not necessary but I used two 6mm x 1.5mm magnet to hold box in place. Makes it snap into place and stay secure though. Drop a dab of super glue to set the magnets.
I started to develop an issue on my LnL where my primer tube would get kinked at the end of the brass primer tube. This caused a several primers to get backed up and caused issues for my press. I made the adapter so that the tube could…
Sous-verre en tissu à imprimer.
Summary This is a nozzle primer for the Prusa CORE One which mounts to the gantry. This allows for nozzle priming/purging at any point during a print. It removes the need to have any priming or purging directly onto the build plate. The…
Replacement lid for the LEE primer feeders. 30% infill, no supports needed.
Primer flip box. No special print requirements.
Dillon Primer tray and tube wall mount. Holds the primer flip tray and 8 tubes.
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
The title says it all. The OpenSCAD file can be adjusted as needed, and has presets for SP/SR, LP, and LR primers, as well as the table listing the standard dimensions from the SAAMI spec. The SCAD script will automatically generate a…
Primer chute for Dillon rl1100/1050. use a zip tie to lock on the tube. put a water bottle at the other end for thousands of rounds before emptying. I printed vertically with some tree supports. Requires a 3/8 inch OD tube. (1/4 inch ID)…
Added Embossed text so I don't have to use my label maker. Too lazy to do magnum primers since I don't use them. I also realized these aren't really snug on the primer tube. Not a problem since they rest on the steel block and aren't…
Made to use the dillon primer alarm on a Hornady LnL AP press All that's needed is a few m3 screws a m3 lock nut and a m3 heat set insert I used a 3d printer leveling knob on the wedge block screw for ease of use but you should be able to…
Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…
I designed this to sit securely under the depriming station of the press but still be out of the way. Easily holds 100+ primers to keep your area clean and clear.
Primer flip trays, 2 different models. one for large primers and one for small primers, these are perfect for progressive reloaders that use primer tubes.
Primer Flipper square 83mmx83mmx8mm fit inside the original primer case doesn't need to print a lid. Bandeja para virar espoletas encaixa na embalagem das espoletas CBC, não precisa imprimir tampa Print instructions Category: Sport &…
The only difference between the one pictured and the STL supplied is that I swapped the small primer rod and the little threaded screw for swapping between large ans small. It's better having the rod behind but as it's still usable as I…
I added grooves for a primer, and where the bullet engages the case to the Bullet for Cattleman Revolver by @Kristofer
This is a Remix of https://www.thingiverse.com/thing:3916949 Made it longer to fit the RCBS Rock Chucker II press. This is useful if you want the primers to fall to the bottom of the ram and prevent them from spitting out the front of the…
I got tired of primers of primers going everywhere on the RCBS Turret press so I created this primer catch chute to be able to direct the primers where I wanted them to go
Very simple storage box to store (and not spill) primers. Useful if you need to store primers without containing carton. Storage boxes are keyed to be horizontally attachable. Dimensions designed for S&B primer plates, and the model…
Es una muñeca basada en una niña real,diseñada en 3d para un pastel de celebración, faltaria hacerle una base para la muñeca o los agujeros en los pies para asi introducirle un pincho de carne asada o cualquier otra base. Aconsejo hacerle…
Insert and fixate (using superglue) a small stainless-steel/aluminium rod for the hinge-mechanism (only on the outer! hinge-parts). Be careful using the hinge – push the caddy completely in, before locking it. I tried to replicate the…
quick and dirty split ring to protect the bottle while priming the cap. Print them in TPU
Threaded primer rod holder for a Dillon 650. Threads are printed and are fairly tight (on purpose so it does not move) but you should not have trouble getting it to thread into place.
Gridfinity 3x3 Vallejo Primer Holder A simple gridfinity module which holds 3xVallejo primer bottles (50*50mm) holes and two vallejo dropper bottles (17 ml - 25*35) holes with additional room for
I have a complete setup of the Lee Auto Prime, including 2 handles, 4 folding primer trays, and most commonly used shell holders. I was getting to be a pain to try and find my pieces between 2 boxes so I decided to create a holder for the…
a simple tray to load primers in the coax seater feed tube
Ce porte-clé reprend l’iconique logo PlayStation dans un style propre et minimaliste. Il est conçu pour être imprimé facilement, sans support, et peut être complété par un changement de filament pour faire ressortir le logo. Ce petit…
This is a storage tray that fits the gridfinity system to organize your tools. All the spare parts for both the large and small primer bar pins etc (everything that comes in the box) have a home in this tray. This is designed to clear the…
This is a custom-designed Primer Bulb V3 made to fit small engines like those found in most weed wackers, trimmers, and other 2-stroke tools. It features a 19mm diameter bulb and a 22mm flange for a snug, reliable seal. The flange is…
Spent primer bottle adapter for Frankford Arsenal X10. Print with 100% infill to get needed stability. Fits standard U.S. sized bottles.
I have a gas brushcutter that is stopped for many years due to the lost of the carb primer bulb and flange. The flange and most of its parts are not made anymore for this brand, so this functional model has born to bring the machine to…
Angelito para primera comunión
Caddy for 2.5" SSD to install in 3.5" HDD bay on TX1320 M1 and machines with similar mounting system.
Option 1: fujitsu_primergy_cage_fan.stl fujitsu_primergy_cage.stl Cage can carry 2x 3.5" HDD drives and 2x 2.5" HDD/SSD with caddy Required parts: 8x heat insert nuts (5x3x5mm) 8x M3x8 screw 70mm fan Option 2:…
I broke the handle to my Lee cartridge reloading hand primer tool, so I CAD a new one in Fusion 360. I printed with PC Blend on Prusa Mini+ with 0.6 nozzle and 30% infill. Seems to work just fine. I am sure PETG will also work…
3"x3" wall bracket that holds a primer system assembly when not in use. It features 2 threaded holes to also store the primer seater assembly. The rack was designed to hold the primer system right side up or upside down depending on your…
Those cans are often leaking, when opened and closed a couple of times. This is a way to keep them upright.
You should probably use a brim and support for the over overhangs PETG or ABS something that can handle heat, and it would be a press fit on my saw (stihl ms 251 c) I'm not sure if it would be compatible with any other stihl saw I didn't…
Just ran my first test. Need to reduce material usage & thin some of the walls. But, it does work and print well. Make sure to use the 44mm for the FW ink, I made it slightly bigger as it scraps the labels if printed to spec. (Technically…
If you're tired of primers ending up on the floor with your old Lee press, try my primer catcher. Si vous en avez assez que les amorces se retrouve par terre avec votre veille presse lee, essayez mon récupérateur d'amorce.
![Gridfinity 3x3 Vallejo Primer Holder [Untested]](https://media.printables.com/media/prints/303517/images/2650209_d86a5322-0447-418d-97ab-0ea33f3cbba4/untitled.png)
