1 / 3
Host-swap SFF 2.5" caddy for FUJITSU PRIMERGY servers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for FUJITSU PRIMERGY servers.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 118
- Makes
- 2
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
You need 4pcs M3x6 countersunk screw to fit the drive in the caddy.
Tested servers:
FUJITSU Server PRIMERGY TX120 S3 SFF
FUJITSU Server PRIMERGY RX100 S8 rack server
FUJITSU Server PRIMERGY RX1330 M1 rack server
FUJITSU Server PRIMERGY TX1320 M3 SFF
There is a lock mechanism, fits perfectly.
If you print it with clear PETG, the drive status leds are visible.
Recommended:
Printing material: PETG
No need for supports.
If your bed adhesion is not great you may need brim.
100% infill
With 0.4mm nozzle:
Minimum perimeters: 4