Stripper Clip Loader
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use these two prints to help me load 5.56 rounds into standard stripper clips.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 228
- Makes
- 0
- Views
- 1,448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
For loading my 5.56 magazines I need my ammo in stripper clips. This is a pain to put the rounds into stripper clips so I developed a couple of quick prints to make this process easier. You just put 10 rounds into the stripper clip bottom and then add a stripper clip to the stripper clip pusher and then you can easily put the stripper clip on the 10 rounds. I have a video on YouTube showing the process and here is the link:
I printed both of these items using PLA and it works fine and is easy to print. The only settings I changed from a standard setting are to increase the infill density to 40%, I like the Rectilinear pattern as well and I added a brim so they would adhere to the bed nicely. For the pusher print you will want to rotate it onto it's back and then it will print fine without supports.
Update: I added another STL file titled “5.56 Stripper Clip Loader Bottom Holes With Bumps v2.” This is a slight modification that adds some little bumps at the top to make the rounds fit better with less movement. I left the original file incase you prefer a little more movement. Both work great.