Counting matching models…
Nerf full length elite dart magazine. With a printed spring. Feature a symmetrical design so you can insert it both ways. Compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo). Printing the magazine Print body,…
Check Out my improved Design - Slim Ammo Box 9mm 50 Rounds V2.0- ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 I did not found a slim Ammo-Box for 9x19 which i liked…
A few 5.56 NATO rounds I modeled up to use as snap caps or dummy rounds. All three variants are able to feed and extract in my rifle. The Spec variants are exact to NATO spec dimensions and the ThickRim has a roughly 0.3mm thicker rim for…
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
-no supports -0.4 nozzle -0.2 layer hight -100% infill -195grams of fillament -8 hours of print time (at 100-150mms) you will need six m3x30 screws put tape on the bottom and some thin foam (i used the foam that my printer came packaged…
I took the basic dimensions of a classic Nerf magazine, stared into the magwell of my Stryfe for good 20 minutes, and then sat at my laptop for 6 hours to produce this. Please keep in mind that I have no idea how to operate Fusion 360 and…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint PlayerUnknown's Battlegrounds (PUBG) is a multiplayer online battle royale game developed and…
This fits into any 50 Cal ammo can. holds 50 shells per tray and can fit two trays stacked in standard ammo can.
If you haven't lost a tent peg or tripped over a peg slightly above the surface of the ground, or the edge of a ground sheet, you have no use for this model! If you have, read on. EASE OF USE Simply hammer in the pegs as you usually…
The design was inspired from MizzrBear's design. This is not a remix
My wife and I hate having to fight the little bag that cotton rounds come in. So I took it upon myself to whip something up. The inner diameter is 68mm so it should fit most standard cotton rounds. If for some reason this doesn't work for…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
A printable small and rifle or pistol primer. These are good for safe firearm function testing, they allow the gun to be dry fired against the plastic primer. After snipping these apart, I used a Lee hand primer to load these into my 9MM…
This is a set of modular pieces that make up the base of my Tikal temple ground series. It can be used for both fantasy and sci-fi settings. This set contains basic walls, corners, floors and ramps. Each piece can be put together with…
Ammunition box for 100 rounds of 45 ACP Kept markings on bottom case for easy counting by 5 bullets from original model Printed with 5 walls and 25 percent infill. Latches 100% in-fill, printed on a side. No supports. 6X M3x30 screws…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Add this sleeve to your bag for fast-charging glow discs for nighttime disc golf! The LEDs will automatically switch on when the disc is inserted, and automatically switch back off when removed! In action: https://imgur.com/a/RKgI1TQ And…
Holds 50 .223 / 5.56 rounds. The draw is mechanically discouraged from sliding about, preventing the draw from opening accidentally. Plenty of finger room to retrieve rounds without overcrowding. BT accommodation at the bottom for…
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
This is a 16 round springless nerf rival magazine. It should only be used with the rival Hera or other blasters with similar chambering mechanisms due to the large force applied by the magazine. It operates using a 1/16” shock cord as the…
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
it can hold 7 rounds and shoot up to 3 meters!
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…
Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.
Created by Designmond @des_3526156137
This is a remake by the author @ildarcheg. I really liked the original design, but I didn’t like the wasted space. So, I modified the model to fit the original insert from the 50pcs Sellier & Bellot 9mm Luger pack, which I found to be the…
Limiter for a Glock 17 Magazine to 10 Rounds. Allows for a little space to be able to insert the magazine with the slide closed. Use this instead of the inner plate. Pull the spring down completely until it snaps into place (there is a…
M41A Bullet scaled to fit the M41A Pulse Rifle Model
Design is heavily based on this model by @HuMa_1372637 , so props to them! Remade their model from scratch to give a little reinforcement to the print as it looked a little weak to me. Install at the bottom of your coffee grounds…
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
No space for a knockbox? Fed up with loosing the portafilter sieve in the trash or organic waste bin while trying to clean it? There is a solution! Modell A, the version that you find in the enclosed pictures is made of Prusament PETG…
Hier ist der PDP PRO kompatible Magazinboden. Einfach gegen den standard Boden tauschen und schon passen die günstigeren Magazine in eure Pro Version. Eignet sich auch super zum Personalisieren um die Magazine auf Wettkämpfen euch…
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
I printed this model on the XL as a multi color print (2 tools), now the regular bullets can be printed on any printer as a color change but the split round can only be done with a printer capable of printing multiple colors on a single…
This 223/556 25 round ammo box was designed in Fusion360 and printed on a Prusa Mk3s+ with eSun pla+. This was specifically designed to be a gift for my pap. I have 5 round boxes as well, but haven't posted them yet. 3mf and gcode files…
In a.m. discipline you need 5 rounds per stage, standing, lying, kneeing. Therefore, this box provides 5 round per stage. Multiple parts: Box itself Slider (cover) Nameplate(s) Arrow Nameplates you need to design individually.
I like the original model, but I made some small changes to fit better to my mags. I made it little bit wider and higher and then cut the top parallel to round follower. Than mirrored to fit my spring. On the end I just heat the spring…
This is Chunky the multifunctional tent peg Of course it is only a peg if you add the metal wire nail. It is designed to work with cheap but big nails with a diameter of 6-7.8mm. Bought pegs are weak, expensive or don't fit my needs.…
Found some measurements of the 303 cartridge used in the Lee Enfields and designed some just for fun in cad. For the clip I haven't found numbers so I used photos as reference. Category: Props
Box for 100pc 9x19mm rounds. To assemble this box fasteners are needed: -3x M3x20mm Socket Head Screw -1x M3x30mm Socket Head Screw -4x M3 Nylock Nut Material: PET-G, PLA etc. Layer high: 0,2mm or lower Supports are needed.
Replica dummy rounds of many rifle calibers. Can be used as snap caps with built-in dent allowing room for the firing pin. All dimensions match SAAMI or CIP specs. Your printer tolerances may be different. Two versions, first with…
Hi, this is my first time on Printables (please be kind). I wanted to make a groundspike cover - or washing line hole cover for my Dad, who either lost his or never got one. This one is for a diameter of 45mm, and modelled on my OEM one.…
PUBG Headphone Stand. Headphones stand inspired by the PlayerUnknown's Battlegrounds logo The backplate is thin so it looks particularly good when backlit Print in two parts and slot together @3DPrintBunny
This is a comprehensive set of 3D printable 9x19mm Luger dummy rounds (snap caps) designed for safe dry fire practice, function testing, and malfunction drills. These models are designed to protect your firing pin and allow you to cycle…
I did my own inlet since i sleeved the cards and they wont fit anymore whith their new height. The model has a dimension of 253x 253 x 40. I provieded to models one is a onepiece and the secondd one is split so that you can print it on…
I created this material efficient reloading tray for 100 pistol cases suitable from 9mm up to .40 S&W, as can be seen in the picture. It holds 100 rounds in a staggered 10x10 pattern. The filament needed is less than 45 grams and printing…
Simple design intended for rounds to sit primer end down. The hinge is made to fit a metal rod, with a 2 mm screw used to cap the end. It’s designed around a 0.4 mm nozzle, three walls, and approximately 15% infill. Test prints were made…
Replica dummy rounds of many shotgun calibers. Can be used as snap caps with built-in dent allowing room for the firing pin. All dimensions match SAAMI or CIP specs. Your printer tolerances may be different. Two versions, first with…
Someone (occasionally) discarded original coffee ground box from Jura coffe machine at our lunchroom and I've modelled and printed a replacement using pictures from coffee machine manual. It works well at our Jura A1 machine. This is much…
2-piece design for easier multi color printing.
1oz Silver Rounds Container Holds 20 Print Settings Printer Brand: Bambulabs Printer: Bambu P1S Rafts: No Supports: No Infill: 15% Filament: Bambulabs PLA Any Notes: Standard wall thickness Arachne wall algo or characters may not be as…
Never liked a knock box for coffee grounds and chucking it into the sink made a terrible mess and blocked the pipes. So I made a container which can hold the humongous amounts of coffee grounds we produce. Bottom of the container has…
Replica dummy rounds of many pistol calibers. Can be used as snap caps with built-in dent allowing room for the firing pin. All dimensions match SAAMI or CIP specs. Your printer tolerances may be different. Two versions, first with…
Replacement for De'Longhi Magnifica S (ECAM 23.210.B). The tab that activates the sensor sometimes breaks and because of that problem I decided to reverse engineer this part.
Remixed from Giobby66 magazine, set to size and added cutouts for fitment to be used as a tool. It is a non working magazine, only for display, stand, vise block, or dummy mag Print Settings Printer Brand: Creality Printer: Ender 3…
Found some measurements of the 8x57 I cartridge used for the K 98 and designed some just for fun in cad. For the clip I haven't found numbers so I used photos as reference. Category: Props
The Nerf Trilogy is a massive shell-loading, shell-ejecting pump-action 3-dart shotgun. I found other rival round shells, but they all seem to use just one massive hole in the middle or are missing the little side bumps so they don't fit…
I love to play with shapes to see what kind of patterns I can make. Then I just have to dial it back to something that is printable.
This is a none magnetic dice box for 10 dice with the Masters of the Universe logo in the bottom and the Faction Logo on the top lid. just paint the logos or break down into single objects My print is done with a 0,4mm Nozzle and 0,2 mm…
Replica dummy rounds of many precision rifle calibers. Can be used as snap caps with built-in dent allowing room for the firing pin. All dimensions match SAAMI or CIP specs. Your printer tolerances may be different. Two versions, first…
This long-handled coffee scoop is specifically designed to accommodate 12oz bags of coffee . Unlike the scoop which came with my coffee maker, which required reaching into the bag, this scoop features an extended handle that easily…
Replica dummy rounds of many rimfire calibers. Can be used as snap caps with built-in dent allowing room for the firing pin. All dimensions match SAAMI or CIP specs. Your printer tolerances may be different. Two versions, first with…
The Ninja Pods & Grounds Coffee Maker (PB040 / PB050) cannot accommodate some taller cups. This life will lift the unit around 23-25mm higher.
This is an ammo case that holds 20 rounds of 22lr. Easy to keep in your pocket. Share ammo with friends or family or just have extra for yourself.
This is an original design. If you use loose coffee grounds in your Keurig K-cup this cork screw can help remove the loose grounds quickly. I've been using this for years so its been thoroughly tested. The cork screw part is designed to…
Hey, everybody. I don't know why there is little popularity for such a unique project “Tikal temple grounds”. Author's account : https://www.printables.com/@Terrain4Print This unique project allows you to create a beautiful and natural…
A clean build plate is a happy build plate and my favorite way to clean my PEO/PEI, etc. build plates is lint free cotton rounds (found in the makeup section of any mega/drug store, don't cheap out - get the “lint free” ones, they are…
Coffee Grounds Tray for JURA ENA MICRO 9 (and maybee 90) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.3mm Infill: 25% Filament: Prusa PLA PLA Black Category: Replacement Parts
Updated 3/25 8pm CT should fit snug without resizing. Do a 13mm test print to confirm. First draft, use at your own risk, leave any questions or comments to improve the design. Untested. Modeled with .308 win/7.62x51 should fit any .308…
I got this grinder super cheap from a coffee vendor who was retiring. It works great, but came with a large doser and tended to waste more grounds than I'd use brewing only for myself. I made a wooden chute shortly after I got it to…
I have an old no-name M4-style softgun which uses non-standard rear-feeding STANAG-style magazines, which are very hard to obtain today. As some of the interal parts of my original magazine has cracked over time, I decided to…
Prop model of the famous HK G3 20 rounds magazine, this is a prop and it's in no way a functioning piece of firearm. The model is not scaled to size but the proportions are kinda right, not really sure on this one, dial in the correct…
Small tube to store 10 First Strike rounds in cal.68, so you do not have to carry around a whole bag if you don't need to. You can print the lid just as is in one color, but I imprinted the First Strike Logo in it, you can use the…
See the original for more details: https://www.printables.com/model/367964-disc-golf-glow-disc-uv-auto-charger-for-night
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coffee Grounds Bench Top Waste Container. Happy printing.
Hello all, to give this and all other revolver replicas a little more weight, I have redesigned the cartridges and provided them with a screwable head. The XL version is a little larger, holds 21 steel balls and brings 8.3g on the scale,…
Print it at least from PETG. DO NOT USE GCODE INCLUDED HERE. I use Vcore3 with Klipper and its Gcode flavor (and macros) isn't supported here, on printables.com (so this file contains Marlin flavor approximation). Included gcode is just…
This is a spill collector for the Demoka M-203 coffee grinder. It will collect coffee grounds that spill on the side of the portafilter when grinding espresso beans. Print instructions Print it in upright position, with brim and removable…
Here's a box for storing your .30 M1 ammunition. It's easy to print. The two main parts of the box print together as a single unit because the hinges are interlocking. This box requires no screws.
Needed something to save the coffee grounds for fertilizer so designed this. Works very well. Print Settings Printer: Geeetech Aluminium i3 Rafts: No Supports: No Resolution: .2 Infill: 20% Notes: For the Tapbar I boosted the infill up to…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Designed for 100 mm nails and a sheet with grommets. See the attached drawing for dimensions. Prints upside down without supports. A tougher material is recommended. I used ASA.
I created this material efficient reloading tray for 25 shot shells for 12 gauge. It holds 25 shot shells in a staggered 5x5 pattern. The filament needed is ca. 46 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
I printed both in PETG. I needed to scale the Pin to 94% because of the tolerances of my printer. I reused the old spring.
This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others. Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw…
Version 2 - jetzt mit Henkel zur einfachen Entnahme Der Siebeinsatz wird in den original Kaffesatzbehälters gestellt. Das Wasser kann so aus dem Kaffesatz in den Hohlraum unter dem Sieb tropfen. So soll die Schimmelbildung im Behälter…
I am kinda surprised no one else started this project but the Destiny/ Nerf looked pretty amazing so I had to order one. unfortunately the large darts have very little power and you only get 3 shells in the kit. So I came up with some…
Most of the models I had printed kept breaking so I've tried making one a bit tougher and a bit bigger. You can tap the coffee out, but in case you're like me and move a bit quick and smack it too hard sometimes some extra strength is…
I recommend printing with ironing enabled.
Coffe Grounds Container for Jura J5 made in freecad. I'm an absolute noob at this but it turned out ok :)
I just used PLA with regular supports. The top piece has a decent amount that can be a little tricky to use. It uses a gopro mount btw Probably most of the parts: Radxa zero 3W (with heatsink) ufl → sma connectors x4 40mm fan some random…
22lr Service Pistol ammo holder (6 rounds per row) 20% infill, .15mm
Questions @ https://www.reddit.com/user/Ok-Shock-7736/ disclaimer: The one problem I am still trying to improve is the latch mechanism, if u hit the mag at an weird angle too hard it can open the trapdoor and essentially “brick” the whole…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
A large knock box for your espresso machine. The box measures 200x96x50mm, and has a slot to hold a piece of wood (or other material) measuring 92x18.5x40mm. Print instructions Designed in Fusion 360, modeled after knock box included with…
Update 30/09/2024 - V2 is now live! Addressed an issue with the lid hinge not generating properly, check again the .stl files if you downloaded previous to this date, now the assembly is gonna be definitely sturdier!…
updated - SD card is now accessible from the rear This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles. Please disregard the antennas used, I'm waiting on…
Grounds container for the most popular Nivona coffee machines.
