Swisspers Cotton Rounds Wall Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.52 – €15.31 net (excluding VAT)
For file: Swisspers CRD_0.4n_0.2mm_PLA_XL_11h52m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.91 excluding VAT (range midpoint).
- Weight reported by the author
- 217 g
- Print time reported by the author
- 11.86 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall mounted cotton rounds dispenser - holds one full package of rounds.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others.
Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw using that size fastener will work.
The slots in front allow view of rounds and access with finger if the stack needs to be pushed down. Pull each round from the bottom.
Print File is sliced for the Prusa XL with the dispenser standing vertically. uses a 10mm brim but no supports needed. Prints in about 12 hours.
The sliced file is ideal for the “silk” shiny type filaments like this on Amazon. These materials tend to not print well with high speed printing (i.e. Input Shaper).
Sliced with the following parameters
- 0.2mm layer height
- 0.4 nozzle
- First layer: 60°C bed, 230°C
- Other Layers: 60°C bed, 230°C
- 4 perimeters; provided solid perimeter wall and reduced print time by eliminating infill moves
- Seem Position: Rear
Native SolidWorks 2023 part file, STL, and STEP included; can split into smaller pieces for smaller printers.