3W Glass Panel Bracket for Pole Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
1st draft. Brackets may need beefing up, may need to put additional holes/screws into the solar panel housing itself, ie 2 on top , 2 bottom. As currently there are only 2 screw points.
Allows attachment of previous enclosure if needed, or attach your own enclosure, or use the holes as zip tie mounts?
Hardware:
6mmx45mm bolts for the 45 deg angle pieces to frame
5mmx16mm bolts for frame to panel housing
5mm nyloc nuts for panel housing nut carriers
5mm and 6mm washers
5mm and 6mm washers
6mmx45 bolts for 50mm pole bracket
50mm (2") U Bolts
Printing:
PETG or stronger (or more UV resistant) recommended
.2 layer height
6 walls, 6 layers minimum recommended