Elegoo Neptune 4/Pro/Max/Plus Fan Shroud V5 with Beacon/Cartographer mount.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V5 of Orzorzorz's/HalfManBear's Fanshroud for the Neptune 4 with an integrated Beacon/Cartographer mount.
- Rating
- 3.5 / 5
- Likes
- 86
- Downloads
- 454
- Makes
- 1
- Views
- 5,887
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Offset values should be set to:
Max and Plus
x_offset: 0.
y_offset: 19.
Pro and Non-Pro
x_offset: 0.
y_offset: 22.
Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but may not be 100% accurate
Note: Due to Clearance Issues with the Z Uprights “Low Profile” configurations of the Cartographer and Beacon rev D are not recommended, “Standard” and “90 Degree” configurations Should have no issues if properly cable managed.
| With Aux Fan | Without Aux Fan | |
| Low Profile | NOPE | A VERY TIGHT FIT |
| Standard | A TIGHT FIT* | HAS ROOM |
| Right Angle | HAS ROOM | ROOM TO SPARE |
Recommend that the Aux Fan simply be removed as the ample cooling potential from the 2x 5015's make it redundant.