Elegoo Neptune 4/Pro/Max/Plus Fan Shroud V5 with Beacon/Cartographer mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V5 of Orzorzorz's/HalfManBear's Fanshroud for the Neptune 4 with an integrated Beacon/Cartographer mount.
- Ocena
- 3,5 / 5
- Polubienia
- 86
- Pobrania
- 459
- Wydruki
- 1
- Wyświetlenia
- 5930
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Offset values should be set to:
Max and Plus
x_offset: 0.
y_offset: 19.
Pro and Non-Pro
x_offset: 0.
y_offset: 22.
Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but may not be 100% accurate
Note: Due to Clearance Issues with the Z Uprights “Low Profile” configurations of the Cartographer and Beacon rev D are not recommended, “Standard” and “90 Degree” configurations Should have no issues if properly cable managed.
| With Aux Fan | Without Aux Fan | |
| Low Profile | NOPE | A VERY TIGHT FIT |
| Standard | A TIGHT FIT* | HAS ROOM |
| Right Angle | HAS ROOM | ROOM TO SPARE |
Recommend that the Aux Fan simply be removed as the ample cooling potential from the 2x 5015's make it redundant.