Maine Coon Cat Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here you can see a picture i took of my Maine Coon Cat called “dieKloi”
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here you can see a picture i took of my Maine Coon Cat called “dieKloi”
This was my fist try of the hueforge software, so i hope you like it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA yourDroid PLA Basic Black Transmission Distance: 0.6
PLA yourDroid High Speed Dark Gray Transmission Distance: 3
PLA yourDroid PLA Basic Beige Transmission Distance: 8
PLA yourDroid PLA Basic White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray
At layer #12 (1.04mm) swap to Beige
At layer #15 (1.28mm) swap to White for the rest.