1 / 3
Magnetic Pincushion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I create a simple design for a magnetic pincushion.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife needed a new pincushion for het sewing room, so I create simple design for a magnetic pincushion. She liked so made several other for her. She can throw the pin into the holder
The design requires ½ inch diameter magnet no thicker than 5/16 inch.
Print with .4 nozzle at .20 layer height.
I attached the FreeCAD model containing the cross sectional sketch used in the additive rotation. There is just two layers of plastic above the magnet, i.e., thin as possible.