HSW Double Glue stick holder for 26mm sticks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple double Glue stick holder for 26mm sticks or below.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 104
- Makes
- 1
- Views
- 328
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Update 11/04.2024: Uploaded different tolerances for the Direct mount design.
Update 24/03/2024: Uploaded a version to directly mount the Glue Stick holder to the wall without the mounted part. I had a bit of wobble in the mount that was printed for the wall, so this solves it.
I know there are plenty of various holders, but I like a snug fit for everything I put on my walls. Could not quite find a perfect fit from other creators for my smaller 26mm in diameter glue sticks. This one gives me a snug fit to put on the wall.
Printed in PLA, no supports needed any infill, but i used 15%.
-------------------------------------------------
There are several files available for this model, each with different tolerances. Before you decide which one to print, please check another one of my designs to determine the tolerance you prefer. HSW Direct Mount Tolerance Check by Dmitri K | Download free STL model | Printables.com
I personally find that a tolerance of 19.85mm (the height of the hexagon from the build plate) works best for me. So, I only print the 19.85 version. However, your printer might not be able to print with the same tolerance, as it only leaves a 0.15mm gap from the 20mm high hexagon hole in the wall. Therefore, I strongly recommend that you first print the STLs from the link above and then choose one of the designs in the files section here to print.