X-Shot Micro Plunger Pull
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement plunger pull for the X-Shot Micro foam dart blaster
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Thought it would be fun to be able to have any color for the plunger pull on the X-Shot Micro foam dart blaster. This part requires the metal pin that comes with the Micro. Simply push the pin out with a tiny screwdriver (or a paper clip), and replace the stock pull with this printed part and re-insert the pin to secure it in place.
I would recommend 3 perimeters and ~15% or more infill. No need for a brim, raft, or any support.
The holes are big enough for the pin to pass through easily. The securing of the pin happens in the plunger's pin hole, but if yours is a bit worn out, you may want to print at 95% to tighten up the pull's holes. This likely won't be necessary, however.