X-Shot Micro Plunger Pull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement plunger pull for the X-Shot Micro foam dart blaster
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Thought it would be fun to be able to have any color for the plunger pull on the X-Shot Micro foam dart blaster. This part requires the metal pin that comes with the Micro. Simply push the pin out with a tiny screwdriver (or a paper clip), and replace the stock pull with this printed part and re-insert the pin to secure it in place.
I would recommend 3 perimeters and ~15% or more infill. No need for a brim, raft, or any support.
The holes are big enough for the pin to pass through easily. The securing of the pin happens in the plunger's pin hole, but if yours is a bit worn out, you may want to print at 95% to tighten up the pull's holes. This likely won't be necessary, however.