Makita DFN350 Tip guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you've lost your original DFN350 soft tip, this can be used as a replacement. Snaps on to the cordless nailer tip.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 73
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a tip for the DFN350 cordless nailer from Makita, the purpose of it is to protect whatever material you're working with from marring or indents that may come from the hard tip of the nailer. Be sure to adjust your nailer power after adding the accessory.
Suitable replacement if you've lost the one which comes with the nailer.
It can be made from TPU, but PLA or any other harder material is good enough to protect most soft woods from marks.
The tip snaps on and stays in place and has a low enough profile to not interfere.
I suggest using a brim, however supports should not be needed.
