FLSun V400 support for BME680
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Temperature sensor for enclosed chamber
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Since my FLSun V400 has an enclosure, I then added a BME680 temperature sensor to get internal temperature data.
I bought this sensor on Amazon (like this: https://amzn.eu/d/1I2RX4h)
Really, this sensor also simultaneously detects humidity, pressure and VOC level.
After configuring the printer.cfg in Klipper you can have this information on the Klipperscreen display, or on Fluidd/Mainsail.
To add this sensor I installed some hardware inside the FLSun V400, mainly a Klipper Expander. (This other project will be included later on Printables :-))
Print parameter:
Type: Minimum PETG (I used Fiberlogy PCTG)
Wall: 2
Infill: 15%
Use M4 Bolt (minimum 10mm) and rectangular Nut in order to use attach below the roof of the V400.
Please support me with Kofi https://ko-fi.com/neospog