Multiple Mechanism Auto-Rewind Spool Holder, Adapted for Prusa 2kg Spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand and Threaded Shaft were extended by 40 mm to be able to use Prusa 2kg spools.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 65
- Makes
- 1
- Views
- 669
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been using these very reliable spoolholders by ea69 for a few years now and always wanted to have one for 2kg Prusa spools. I used the step file and made the stand and the threaded shaft 40 mm wider. I did not know the parameters for the thread, so I just cut the shaft a bit from the end on the gears side and extended it by 40 mm. Threads will hardly be required in the extended portion of the shaft. I also added some fillets to the many sharp corners to make the model a bit more pleasing to the eye and perhaps reduce stress points on the model. I have included the Fusion 360 project file with my mod as well as a step export of that project. I have added just the two parts I modified here, please use the rest of the parts from ea69's original model.