Radiator fan booster (Heatbooster)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model which uses an Heatbooster and a couple of fans to boost radiator output.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 85
- Makes
- 0
- Views
- 1,355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a model which uses an Heatbooster and a couple of fans to boost radiator output.
You will need the following stuff:
- 2 Noctua NF-A6 25 pwm fans (each module takes two fans)
- A heatbooster (https://www.sdr-engineering.nl/webshop/index.php?route=product/product&product_id=50)
- A fan extension cable (when using multiple modules). For a reference check the images for an example.
- A 12v adapter to power the heatfan (the amount of Amperage depends on the amount of fans). For 4 1A will work, but for 6/8 2A is better.
The bottom model is used to hold the fans in place, the top cover is just for good looks. They will just slide into place, if they are to loose a drop of glue might help.
Orientation:
- The top part should be oriented bottom side up
- The bottom part should be printed at its default orientation
Print settings:
I printed these in PLA on my X1C, no supports needed. Margins in the mating connectors are quite tight. Thats so that they don't slide out easily. A drop of glue can be used to make it stay put if needed.
You can use other printing filaments which can better handle heat, but for me i haven't needed it.