Wooden Vertical Carousel Spice Rack / Alchemy Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project features a making of Wooden Vertical Carousel Spice Rack adorned with Alchemic Design decorations.
- Rating
- 0 / 5
- Likes
- 81
- Downloads
- 146
- Makes
- 0
- Views
- 1,813
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project features a making of Wooden Vertical Carousel Spice Rack adorned with Alchemic Design decorations, alongside spice boxes embellished with laser-engraved patterns.
Using Oak, Alder, and Walnut, I created a smaller version of the Vertical Carousel I've long envisioned. Along the way, I delved into the intricacies of wooden mechanisms, mastering gears, chains, and transmissions.
All challenges have been tackled, and the project is now available as open source.
Join me in bringing this elegant and practical creation to life.
Tools:
- DIY Laser cutter/engraver 520x520mm, 5.5w
- Disk sander
- Screwdriver
- Hand router 1600 W, V-bit 45 degree, Round bit R=5 mm
- Clamps
- Sandpaper: 120 / 220 / 320 grit
Materials:
- Oak sliced veneer 4.5mm, 2,5 mm
- Alder sliced veneer 4.5 mm
- Walnut sliced veneer 4.5mm, 2,5 mm
- Plywood 4 mm, 6 mm
- Bearings: d=4, D=9, H=4 x 8 pcs
- Bearings: d=8, D=14, H=4 x 10 pcs
- Screws: 2.5x12 mm, 2x10 mm, 2x4 mm
- Glass bottles: D=47, H=80, V=90 ml
- Small metal brush
- Bamboo sticks D=4mm (for BBQ)
- Magnets D=3mm, H=4mm (NdFeB)
- Masking tape
- Glue: Titebond 2, 3M Scotch-Weld Fastbond 30, CA Glue + Activator
- Wood tinting: Vidaron Beica Walnut (B09), Palisander (B10), Mahon (B13)
- Oil: Tundra oil with Carnauba
- Bee Wax