1 / 9
Smart Orbiter 3 - EzMount V1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
S03 EzMount was designed to facilitate the assembly of the Smart Orbiter v3.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 68
- Makes
- 1
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction:
The main purpose of this adapter is to have a solid base for the operation of the S03, so the user only has to adapt the S03 to his printer and does not have to worry about mounting a probe and a fan to the printer adapter.
Features
- Clear view of the nozzle.
- Supports Cr-touch, Bl-Toch, Microprobe leveling probes, more adapters will be added soon.
- Manual adjustments of the distance of the probes.
- Compact design.
- Minimum support required.
Hardware:
- 2x M4 L20mm
- 2x M4 nuts
- 2x M3 L6mm
- 4x M3 L8mm
- 2x M2.5 L8mm
Updates:
- 25/03/24: First release.
- 08/04/24: New duct added, enlarging the hole to pass the fan cable.
- 19/04/24: New fan duct added.
Print Settings:
- Print in Petg
- 0.2 layer height
Notes:
I invite you to leave your comments and suggestions to improve the adapter.
Thank you!