CR-10s Bed Spring Spacer - Parametric Fusion 360
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was used to raise the bed by adding this below the spring. I was having problems with the z-stop being almost to…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 53
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This was used to raise the bed by adding this below the spring. I was having problems with the z-stop being almost to the extent of the bed springs, causing frequent problems and adjustments.
This was designed in Fusion 360. That file is included. Parameters were used for all values: screw (bolt) hole, spring diameter, Offset Height (amount you want bed raised), CupHeight (added after offset), and wall thickness.
Feel free to use as is or change parameters as needed for your application. This should work for any printer with similar springs in the bed.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Doesn't Matter
Supports:
No
0.2
Infill:
20%
Filament:
[
Any Any, I used PLA+ ](http://www.amazon.com/s?url=search-alias&field-keywords=Any+Any%2C+I+used+PLA%2B&tag=thingiverse09-20) Any How I Designed This
Fusion 360
Fusion 360 file is included.
Text was added to the bottom just as a reminder of the current offset. If you change the Offset dimensions you may want to edit the text to the given amount of your offset.
Category: 3D Printing