Ender 3 Z-Axis Stepper Motor Mount with M3 Screws/T-nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the design to use M3 screws/t-nuts to secure the mount to the 2040.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 93
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Thanks to @elcubano for having this design to use. All I had were M3 screws and T-Nuts. I modified his design to use what I had and seems to work great.
--Print Info--
Printer with Eryone Clear PETG.
3 Parameters
30% Cubic Subdivision Infill
Normal Supports Everywhere (This created tiny supports just around the two horizontal holes which were easy to remove.)
Screws Used:
x2 M3-20mm screws for the raised top.
x2 M3-12mm screws on the lower back.
x2 M3-12mm screws with T-Nuts to secure it to the printer.
--Other Notes--
I attempted to keep it a similar height as the original mount by using a stack of cards. Took a while and tested it with shims, but eventually found that they were not needed. Used the original coupler and added an Anti-backlash kit to my existing Oldham coupler. (The coupler was getting worn and loose.)
The mods with freshly cleaned/correctly aligned rods works great.