1 / 5
IKEA Diamond Brunsta mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA Brunsta lamp shade diamond mod
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 66
- Makes
- 0
- Views
- 1,028
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a nicely designed wire lamp, and found one in IKEA. Having the same lamp on every room was a bit boring, so i modified the IKEA BRUNSTA lamp to look like a diamond. You can also mix and match colors to make it your own. I used PLA for the print to make it stiffer. PLA should be alright for LED light bulbs.
I call this the “IKEA Diamond”
IKEA product page “https://www.ikea.com/gb/en/p/brunsta-pendant-lamp-shade-black-60333063/”
Print settings:
Diamond base
- 0.2 layer height
- 3 perimeters
- 20% infill
- support enforcer box on every hook (Check the project file in the downloads section)
- Supports everywhere
- Dry your filament before this print, otherwise the print will string
Diamond point
- 0.2 layer height
- 2 perimeters
- 20% infill
- Supports everywhere
- Print in 5 degrees lower than usual and slow down to 50%
- Dry your filament before this print, otherwise the print will string
Slicer used : PrusaSlicer 2.4.0 Alpha 3