Bench stop Stanley workbench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
How many of us have lost a bench stop from our Stanley workbench? They are hard to replace so I decided to print a few…
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 127
- Makes
- 1
- Views
- 464
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
How many of us have lost a bench stop from our Stanley workbench? They are hard to replace so I decided to print a few spares in PLA. I was concerned that the adhesion between layers of PLA is not very good so they might shear off if the vice is tightened too tightly. To get around this, I printed the model at 10 degrees off the horizontal. That means that if the shear force is horizontal, it will be distributed over a number of layers. It works well in practice.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.4 mm
Infill:
100%
Filament: Multicomp PRO PLA works but PetG would be better Red is nice
Category: DIY