fast printable easter egg dry stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: easter-egg-dry-stand-foldable v14_0.2mm_PLA_MK3S_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a small stand to put a freshly colored Easter egg on to dry
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 67
- Makes
- 2
- Views
- 272
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Who doesn't know that?
The freshly painted Easter egg is full of sticky paint and now where to put it to dry?
So far we have always used our many egg cups, but the eggs always stuck to them and an unsightly edge remained on the egg.
With this stand, the egg is stored on three tips only which results in minimal contact.
After assembly, the tips protrude slightly below the base plate. This means you can quickly fix them there with a soldering iron - no glue necessary.
The right material would probably be ASA. I only printed it in PLA and will report after Easter whether it was able to withstand the still somewhat hot eggs.
Update March 30th, 2024:
- no issues with PLA so far, printed and used 25 pieces. But do not clean the stands by using hot water after painting :-)
- Uploaded gcode for 6 pieces