fast printable easter egg dry stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small stand to put a freshly colored Easter egg on to dry
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 272
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Who doesn't know that?
The freshly painted Easter egg is full of sticky paint and now where to put it to dry?
So far we have always used our many egg cups, but the eggs always stuck to them and an unsightly edge remained on the egg.
With this stand, the egg is stored on three tips only which results in minimal contact.
After assembly, the tips protrude slightly below the base plate. This means you can quickly fix them there with a soldering iron - no glue necessary.
The right material would probably be ASA. I only printed it in PLA and will report after Easter whether it was able to withstand the still somewhat hot eggs.
Update March 30th, 2024:
- no issues with PLA so far, printed and used 25 pieces. But do not clean the stands by using hot water after painting :-)
- Uploaded gcode for 6 pieces