topstone 4 Cannondale Derailleur Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cannondale Derailleur Hanger M12 x 1 Double Lead Circular Fitment, TA ST SS070 , K33009
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My derailleur hanger been broken by stupid reason and i thought it's a good opportunity to check is it possible to replace it with printed part. I couldn't find pre-made model, so designed it myself.
Don't try do it with PLA or PETG, it won't withstand load!
First prototype I've printed with ABS, but it held only about 30 km.
So second one I've printed with PA-CF, and so far it passed 50 km already without any signs of deformations.
Place model 45 degrees to print bed (as it shown on screenshot), this will help to withstand bending load.
Printed on Bambu P1S with bambulab PA6-CF.
- 0.4 nozzle
- 0.16 layer height
- X-Y hole compensation: 0.2
- 4 wall loops
- 5 top and bottom layers
- 50% grid infill