53 models
Used TPU so solve the problem of not enough grommets that came with a new frame. This could potentially work for other frames if it is scaled up or down in the slicer.
Since there's no way to buy these any more from Cannondale, I made this. It's a replacement cable guide for the top tube brake cable on older Cannondale bikes. It's designed to be printed in a flexible material so you can get it around…
Keychain for your bike keys! Enjoy the model and leave a like for help me create more content.
These are a number of different tools necessary/helpful for disassembling and assembling a Cannondale Lefty Ocho Carbon fork. Lefty fork holder.STL: Soft jaws for the overall fork to hold it safely in a vise Soft jaws 10mm.STL : Soft jaws…
This adapter blends the geometry of the SSE4 spacers smoothly into the profile of the Specialized S-Works Tarmac SL7 Stem , with features for the cable port, registration pin under the stem, and a notch to secure the top cap cover.…
do you want to use a mud guard on a lefty? with this mount is it possible. this one is designed for the brand Enlee. to complete this do you need to use some zip ties, and 4x m4 bolts in a 15mm length. and 4x m4 brass knurled nuts. I made…
Additional parts needed per grip (Only if you're printing the lock-on ring) : M2 insert (3-3.5mm OD, 3-4mm lenght) M2x10mm socket head screw. The whats whys and hows: My original Cannondale D2 single lock-on grips were soft and…
Will extract bearings with 30mm internal and 42mm external diameters. BB30/BB30A 6806 Hardware required (Metric/Imperial) 100mm M12 (1/2") bolt 1x oversize washer, diameter 50mm 1x M12 (1/2") washer 1x M12 (1/2") nut Tools required 1x…
Pocket to hold “Fabric” multitool.
to spice up the look on this beautiful bike
EN: The Cannondale Topstone Carbon has a cover in front of the bottom bracket for a battery that is usually not needed. I have constructed a cover in which two CO2 cartridges are inserted at the top and at the bottom, i.e. in the frame,…
Two part rear fender mount for Cannondale Topstone Carbon. The upper screw mount should be quite universal for different fenders, while the lower clamping mount is specific to the SKS Velo 42 Urban Fender that I reused from an old bike.…
Cannondale bikes comes with a proprietary SP Connect slot and includes an intellimount stem mount. I did not want to spend anymore than I needed to attach my phone, so I decided to make a GoPro version of the mount. Support is needed. I…
Hydraulic cable brake holder for Cannondale Lefty forks. It clamps the cable to the tube to prevent it from being torn apart, released, or causing something else dangerous.
Chain Suck protection for Cannondale Scalpel SE trail bike. Protecting carbon frame from damage by the chain.
My derailleur hanger been broken by stupid reason and i thought it's a good opportunity to check is it possible to replace it with printed part. I couldn't find pre-made model, so designed it myself. Don't try do it with PLA or PETG, it…
Toptube storage box for Cannondale Topstone Carbon. It uses the existing bottlecage style mount (M5 Screws 65mm apart) and follows the toptube shape. It has plenty of clearance to the steering tube that could be used to increase storage…
The Tube Top Plug Cab broke from my Cannondale Lefty, so I decided to print instead of rebuying it. I printed it in PLA within 0.1 mm with a Core One for the smoothest experience. PETG works also. Also, I reused the existing O ring; no…
wall holder for bike helmet If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: verbatim petg…
This fits on most roadbike handles and can fit on mountain bike ones too. Print with 0.2mm nozzle or 0.4mm.
The wheel sensor clamp broke after nearly 3 years, making it difficult to change the battery without disassembling it from the spoke. This adapter solves that problem by giving the sensor a second chance at life, allowing it to be easily…
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
Drill a 3mm hole in the bottom if you are concerned about water being trapped when the crank is stored in the down position. Printed in PETG with variable layer height (0.2mm max, ~0.11mm near the top). No supports or brim needed. To…
Protection cover for end of the ChainStay of the Cannondale Scalpel SE trail bike. This cover protects chain stay end from incidental contact with the chain.
This is a remix from this Bike Chain Coaster . Thank you for this great design. Printed with PLA and 0.28 layer height.
Cannondale CAAD12 Di2 Conversion Kit – Frame Plugs & Cable Clip This 3D-printable TPU set is designed for Cannondale CAAD12 owners upgrading from a mechanical groupset to 12-speed Ultegra R8150 or Dura-Ace R9200 Di2 , ensuring a clean and…
Little cap on my frame was missing, a quick print with TPU made the trick! A hole inside the design will make it (i hope so) easyer to remove if it need to. It is a really tight shape, a bit hard to install. But this time i wont loose it.…
Bike cable housing ferrules for brake and shifter cables. Used to convert older model Cannondale mountain bike to fully enclosed cables. Printed with TPU for flexibility and reduced movement noise.
Easily integrate this mount into your Cannondale bicycle's existing mount points, simplifying the attachment process for your GoPro and RAM ball mounts. Effortlessly enhance your biking experience with this seamlessly integrated and…
I designed this mud flap to fit my Cannondale 29r. This bike mud flap should fit any 74mm downtube. I printed this vertically and I would suggest using supports for the corners near the build plate. I forgot to so I didn't end up with the…
Note: I also had to Dremel the rear fender a little bit to prevent it from interfering with the front derailleur on my 2x GRX.
I lost the mounts for our Cygolite Metro 1100 & older Cygolite Metro 500 lights for family bikes. This fits the 22mm bar on Cannondale Quick CX3, Cannondale Quick 20, Cannondale Quick 24, & likely other models. The standard part fits the…
Klíčenka Cannondale
this mount is made for a Cannondale Scalpel. So I’m not sure how well this will mount on other Brands or Models from Cannondale. but most bicycle bottles should fit with his mount. but this hard to say of course. I do recumbent the use of…
storage for cannondale supersix evo
Custom cable routing for bikes. Its mounted on-top of the bottle holder mount. It allow to nicely route shifter and brake cable over lower frame tube. Specially designed on Cannondale Scalpel Carbon frame.
CANNONDALE BICYCLE KEYCHAIN, FOR CYCLING SPORTS ENTHUSIASTS
This is a clip to hold the power cord off the floor. I have my Cannondale SuperSix set up on a stationary trainer for Zwift Share your Make:)
Cannondale's original logo from the 1970's. I wanted to be able to quickly identify my ebike key. I printed this in TPU, 0.15 layer height, gyroid infill, 3 bottom and top layers to be more flexible.
Bar end parts repair parts for Cannondale. For people who have lost their bar end parts. Materials：PET-G（PLA is not recommended) We look forward to your comments.
Made some reversable models (only need to print 1 of each to achieve both tasks, when tools are flipped then can act as retention for opposing side.) so I didn't have to spend $40 on a proprietary Bearing and cup tool for my early 2000's…
I created this part to solve an issue where the rear fender starts to sag over time , putting strain on the integrated rear light cable. In my case, the sagging eventually caused the cable to be pulled out of the rear light . This clip…
Texts were customized with slicer, not part of the model. I also attached a small piece of electrical tape on the Airtag to prevent rubbing against the bike, and reduce vibration. f3d file included :)
Garmin wants the radar mounted on the bike's seat post, but the seat post rear view is completely blocked by a trunk bag. The best spot I could find to mount the radar is on the downtube of the bike rack. Based on photos I see at…
Print settings: Step: 0.2 Shell: 2 Infill: 30% Supports: Yes Filament: PETG GST3D (Black)
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
These are a number of different tools necessary/helpful for disassembling and assembling a Cannondale Lefty Ocho Carbon fork. Lefty fork holder.STL: Soft jaws for the overall fork to hold it safely in a vise Soft jaws 10mm.STL : Soft jaws…
Cannondale's original logo from the 1970's. I wanted to be able to quickly identify my ebike key. I printed this in TPU, 0.15 layer height, gyroid infill, 3 bottom and top layers to be more flexible.
Garmin wants the radar mounted on the bike's seat post, but the seat post rear view is completely blocked by a trunk bag. The best spot I could find to mount the radar is on the downtube of the bike rack. Based on photos I see at…
EN: The Cannondale Topstone Carbon has a cover in front of the bottom bracket for a battery that is usually not needed. I have constructed a cover in which two CO2 cartridges are inserted at the top and at the bottom, i.e. in the frame,…
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it. I was able to print this without…
If you have a phone holder like the one shown in photo, this shim will allow you to fix it to a Cannondale bike stem. Push two 3mm countersunk screw through the holes in the bracket into the bike stem holes. The don't screw in, they just…
This cable guide is for those who want to run full length derailleur housings on their Cannondale CAAD 12 or equivalent. Simply drill out your downtube cable stops and feed the housing through to the appropriate derailleur(I take no…
